Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: dannymack on March 23, 2014, 04:42:28 pm

Title: Converting my brushes 😳😳😳
Post by: dannymack on March 23, 2014, 04:42:28 pm
Does anyone else do this ?
I got my new brushes but I find the jets and hose to the jets just don't let out a faster speed than I want, as I'm using 6mm pole hose. I have to remove the brass jets from the brush as I use the Ali hexagon jets 2mm pencil ones from Omnipole. I have to drill bigger holes in the brushes to connect my bigger hose to my Ali jets.

My water comes out so much faster but do lose a few bristles from the brush to accommodate the hexagon jets !!! 🇬🇧🇬🇧👳
Title: Re: Converting my brushes 😳😳😳
Post by: bobplum on March 23, 2014, 04:45:40 pm
i dont convert....i make my own occasionally
Buy them from Asda and convert
Saying that i do have two mixed hybrids extreme on the two poles we use at the moment but for connys and fascia i go out and buy some hard bristle brushes
Title: Re: Converting my brushes 😳😳😳
Post by: dannymack on March 23, 2014, 04:50:51 pm
That's a good idea Bobski, I just spent £70 on to brushes and have to drill bigger holes in them for the jets. Ill take pics of in a min a show ya. Hope alls good Inda hood apart from this poxy weather rain rain & more rain 👍
Title: Re: Converting my brushes 😳😳😳
Post by: dannymack on March 23, 2014, 04:56:15 pm
Pics below of jets I use !!!😮😬☀
Title: Re: Converting my brushes 😳😳😳
Post by: Smudger on March 23, 2014, 05:06:36 pm
I have to convert all our brushes to take fan jets, also the gardiner sockets to take Tecbuk heads on the quick loc system

Darran
Title: Re: Converting my brushes 😳😳😳
Post by: dannymack on March 23, 2014, 05:08:24 pm
O I'm glad it's just not me Darran !!! 🐊
Title: Re: Converting my brushes 😳😳😳
Post by: Mike #1 on March 23, 2014, 05:10:57 pm
Clarkes 1mm welding tips you can buy them off eBay and they are a straight forward replacement for Gardiners jets . Mike
Title: Re: Converting my brushes 😳😳😳
Post by: dannymack on March 23, 2014, 05:28:09 pm
Thanx for all Info
It's strange that Gardiners jets are 2mm and the Omnipole hexagon Ali jets are 2mm but for some reason the Ali hexagon ones seem to let water out faster!!! 👍
Title: Re: Converting my brushes 😳😳😳
Post by: Paul T on March 23, 2014, 06:20:31 pm
Where did you get the luminous pole hose from Danny ?
Title: Re: Converting my brushes 😳😳😳
Post by: dannymack on March 23, 2014, 06:22:31 pm
Paul I think I got it off Ebay m8, quite some time ago but am sure suppliers may sell it now. 👍
Paul it's either 6mm or 8mm I can't remember. Type in water fed pole on eBay or try illuminus hose
Title: Re: Converting my brushes 😳😳😳
Post by: dannymack on March 23, 2014, 06:36:12 pm
Paul see pic below found on eBay 👍🇬🇧
Title: Re: Converting my brushes 😳😳😳
Post by: Paul T on March 23, 2014, 07:06:29 pm
Cheers Danny
Title: Re: Converting my brushes 😳😳😳
Post by: dannymack on March 23, 2014, 07:15:38 pm
No probs your welcome Paul 👍 :)