Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: jonboywalton75 on February 21, 2014, 08:42:48 am
-
I am buying an extreme 18 and wondered if an Slx 22 base section would fit the extreme?
Also i have some gardiners goosenecks with the two prongs at the end for screwing directly onto a brush and would like to know can I convert them to quick lok?
Do I have to cut the end of the gooseneck to fit an adapter?
Cheers in advance
-
I am buying an extreme 18 and wondered if an Slx 22 base section would fit the extreme?
Also i have some gardiners goosenecks with the two prongs at the end for screwing directly onto a brush and would like to know can I convert them to quick lok?
Do I have to cut the end of the gooseneck to fit an adapter?
Cheers in advance
Hi jbw
The base section from the SLX22 would fit onto the Xtreme18 as an extension. You can also fit and use an SLX Extension #5 for this purpose if required - http://www.gardinerpolesystems.co.uk/acatalog/The-New-SLX---Extension-Sections-SLX_EXT.html
To convert an older style carbon gooseneck you would need one of these gluing on to the end - http://www.gardinerpolesystems.co.uk/acatalog/QUICK_LOQ_C_ADAPT.html - To do this you would need to cut the end portion off of the carbon gooseneck, sand the end 3cm down a bit so that it slides into the fitting. Glue on the plastic convertor ensuring it is lined up straight and then when glued on and dry drill a hole through the hole in the convertor into and through the top of the carbon gooseneck shaft to allow the hose to come out.
-
Cheers Alex
Can't wait to see the difference between an Slx 22 and an extreme 18 ;D
-
Alex i think you need to put in bigger orders for the extreme 25 , already sold out!
i was on the verge of buying a 25 with 35 extension pack :)
now i have to wait till march .