Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: neiljoust on February 15, 2014, 02:33:32 pm

Title: help
Post by: neiljoust on February 15, 2014, 02:33:32 pm

hi guys i have just rearranged my van but i dont know where the wires go of my shurflo   
pump in to the controller and the battery i have 2 wires from pump which are blue and red and my controller has red and black and blue and brown i just dont know where they are supposed to go please help i am bald now lol

Title: Re: help
Post by: capn sparkle on February 15, 2014, 02:43:43 pm

Pump wiring diagram photo

Title: Re: help
Post by: neiljoust on February 15, 2014, 02:47:50 pm

Thank You i have done that but the pump wont turn off when i turn controller off any ideas please

Title: Re: help
Post by: andyM on February 15, 2014, 02:48:26 pm

Red and Brown are LIVE WIRES.
Blue and Black are NEGATIVE WIRES.

Title: Re: help
Post by: capn sparkle on February 15, 2014, 03:08:54 pm

Quote from: neiljoust on February 15, 2014, 02:47:50 pm

Thank You i have done that but the pump wont turn off when i turn controller off any ideas please

Mine gave me grief on set up too - could it be the calibration values??

Title: Re: help
Post by: neiljoust on February 15, 2014, 03:17:28 pm

just tried that but pump still wont turn off bloody thing

Title: Re: help
Post by: capn sparkle on February 15, 2014, 03:26:49 pm

Rear of pump diagram if that helps

Only other thing I can think of is an air lock (is it running dry and unable to switch off due to lack of pressure)

Title: Re: help
Post by: neiljoust on February 15, 2014, 03:30:59 pm

there's running water coming through

Title: Re: help
Post by: neiljoust on February 15, 2014, 03:35:03 pm

(http://www.cleanitup.co.uk/smf/1392478385_neil.JPG)

i have done it like this but looking again on theres , theres no filter on pump so my filter is to the side and when on it only fills up half way , do i need that filter please

Title: Re: help
Post by: capn sparkle on February 15, 2014, 03:48:46 pm

One more thing - try connecting your usual brush set up and let some water flow - possible to bleed various different bits then

Give me a ring on 07931 185144 and i'll call ya back

Glenn