Clean It Up
Market Place => Used Equipment For Sale/Wanted => Topic started by: rb4no on February 12, 2014, 08:18:42 am
-
Hi there, selling my TECH-CLEAN Honda GX390 Interpump Pressure washer and accessories all in excellent condition and working order.
http://www.ebay.co.uk/itm/HONDA-GX390-Petrol-Pressure-Washer-Interpump-Rotary-Surface-Cleaner-Lances-/111277640040?pt=UK_Home_Garden_PowerTools_SM&hash=item19e8aa0968
Will be listing more items, I've got an industrial 110v 3 motor numatic wet and dry vac with various hoses, dirty water sump pump which allows continuous vacuuming and pumping of water simultaneously, brand new wand, and pole for gutter cleaning plus camera. Excellent machine!!! I have a 110/230v converter, means you can use domestic supply!
5kva 110v generator
21inc mosmatic stainless rotary floor cleaner, very very little use, modified to take a vacuum hose in conjunction with the above vacuum works really well saves a lot on rinsing and sludge removal!
-
How much for the Mosmatic mate?
-
Interested the the vacuum if you could courier it.
-
The Mosmatic has had very little use plus the conversion, so looking for about 425 quid, however could do a deal along with the vac it makes a nice package as it extracts as you go along. I would rather not send as i want to ensure your happy with all the goods before they leave me. However otherwise I suppose I could arrange to send via courier probably on a pallet I could find out at extra cost. If you want send me your email address and I'll load up some video on youtube weather permitting.
-
does the sump pump need to be primed and have a continuous flow of water , silly question you might think but I have a job t do every 3 months , removing water from a roof top a pic below .
so I may be interested if suitable.
geoff
-
hi geoff, yes it does need priming, very easy to do, as soon as the vacuum drum has a few inches of water then just shake it about a bit to prime, then it stays primed with continous flow. It also picks up small solids like bits of small stone, grit sludge and moss etc. eitherway you can put a different one in if you like as the setup is setup for it. where abouts in norfolk are you? I've got a few bits n bobs that might interest you like the mosmatic with vacuum off which compliments the vacuum nicely.
-
Norfolk ???????????
Please don't insult me ;) they talk a bit funny down there!!
I,m in east Yorkshire , I am interested in tool for hard floors etc ,but 21inch I think too big
Geoff
-
haha sorry mate, some of them do talk funny not me though.. not from round these parts!! 21 inch is pretty standard and i've optimised it to work best with a 15 litre machine..
-
Interested in the vacuum, whats the model no ? thks Mike
-
hi mike, it's very similar to this one, it has two switch one powers two motors and another one powers the third. however it's been professionally converted to suck up water, this is fine as they have bypass motors and it's got a proper floating ball attachment. i'll get some images set up soon
http://www.numatic.co.uk/products4.aspx?id=87&r=6&sr=14
-
hi mike, it's very similar to this one, it has two switch one powers two motors and another one powers the third. however it's been professionally converted to suck up water, this is fine as they have bypass motors and it's got a proper floating ball attachment. i'll get some images set up soon
http://www.numatic.co.uk/products4.aspx?id=87&r=6&sr=14
Assume you mean is has been coverted to pump out ? Who did the conversion was it Numatic (Peter ?) which sub pump did they use ? interested in pics plus cost, if you can send details to mike@greatoutdoorsandin.co.uk, away end of Feb if we can sort it sooner great, thks Mike
Why are you selling exterior kit mate ?
-
hi mike, i've got someone coming up from london to look at the p washer in a couple of hours, i'll be outdoors to take images of the vvac setup. The water conversion was made already when I got it, I spoke to a Numatic engineer and sent him a load of images, he said that as they hav bypass motors even in the event of sucking water through the system it ought to be OK. The ball valve is a professional setup and fits as it should. I had a local machine shop cut into the bottom of the drum and weld a stainless pipe both sides, along with a valve on the outside. Then got him to cut a small hole about two thirds up the drum and I then fitted a plastic / rubber gland which allows you to feed a wire through! The pump is just a normal 230v sump pump you can get from machine mart. The vac itself is 110v but i have a 110/230 converter which cost a bomb! I'll get those images to you a little later.
-
Mike just sent you a bunch of images. let me know if I can help some more richard
-
deposit taken on the p washer!!!
-
Can i have pics of all of it... info@pressure-washing.me.uk
-
p washer is fully paid for now. chris just sent you some images of the vacuum will be loading more stuff soon. richard
-
How much did you get for it?
I have one for sale, very little use just sitting in my garage, if there is a demand for them I might as well sell it
-
i got just over 900 quid, but it was in excellent condition, no more than three pulls and it starts, chassis was almost like new, accessories were good quality items worth a few quid alone i guess.
-
Thanks for details Richard, vacuum looks good, just not what we Are after, wish you best selling kit mike