Clean It Up
UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: Lewis Newby on January 31, 2014, 03:30:08 pm
-
Hi guys im getting on really well with PB and ultrapack for the dirty jobs.
But lately I have had a few 2nd and 3rd cleans where the carpets are fairly clean and I felt pb was a little over the top.
Is there something milder I should be using on jobs like this?Also I have a suite coming up next week which is pretty clean but the customer would like a 'freshen up' for a visit from family.
My local supplier's stock craftex and prochem. I am toying with trying the sample pack from solutions also.
Cheers
Lew
-
Get that sample pack !!
I have recently switched from Prochem, and am now using their products ;D
-
id go with prochem pure clean
-
Pure clean and a scoop of sodium percarbonate if you need a little extra oomph.
-
id go with prochem pure clean
ditto
-
Get the sample pack!!!
I would put a fiver at least on the table that said you would continue with those products.
I have used only them for 8 years now.
-
or just use lower dilution rates.
Peter
-
Thanks for all the replys, I have been using lower dilution ratii but as im nearing the end of my current tub I was considering trying some new pre-sprays. Its a pretty even split from the replys, perhaps I will get both the sample kit and some pureclean to try.
Regards
Lewis
-
Get the sample pack first.
-
We have just started using DFC105 - it seems to tick all the boxes as regards the eco bit and gives very acceptable results. Spray down luke warm or cold and rinses cold if you want.