Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: johnfrancis on January 16, 2014, 03:32:21 pm
-
my varistream has stopped working, to buy a new one is quite expensive is there another way to control the flow of my water to my pole that is similar?
John
-
Hi my controller just packed up,whils it was being repaired,I connected the pump straight to battery,it worked ok,but the downside pump is running flat out when you call for water,resulting in using a lot of water,also when you stop water flow the pump is going from flat out to a sudden stop,don't think this is good for pump but got me out of trouble.
There a guys on here that work without a controller but don't know if they do the same as I did or if they have another way of regulating water flow
-
In honesty you are better replacing the controller, the newer units have a wide range of features that benefit your system.
-
thanks for the reply. I have now fixed it. I bought a flow controller from Maplins and a on off switch which cost in total £20, I've set it all up and is working perfectly.
john
-
thanks for the reply. I have now fixed it. I bought a flow controller from Maplins and a on off switch which cost in total £20, I've set it all up and is working perfectly.
john
Except you haven't got an electronic pressure switch.
-
don't need one, I work it off my remote control.
-
where is the electronic pressure switch in a set up like that, in the pump side or inside the digi box?
-
the electronic switch does not come into play, which is in the pump. the reason is that when I want to stop pump I just press my remote button which is around my neck, and this turns off my pump, so it has no water pressure going to it.