Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: colin bird on January 10, 2014, 07:40:22 pm

Title: Help please
Post by: colin bird on January 10, 2014, 07:40:22 pm

I have a purefreedom van mounter ro system,digi controller has gone tits up,I have an old controller from a two pump system ,that does not have an on off switch for filling,am I correct in thinking that if I connect the solenoid direct to the battery I will open and allow me to fill tank.
Any help appreciated

Title: Re: Help please
Post by: Smudger on January 10, 2014, 08:24:51 pm

If I were you I'd remove the solenoid completely until you replace the controller
Should be fitted between the prefilters, undo the hose either side ( or unwind it off the filter housing and replace with a straight bit of hose

Darran

Title: Re: Help please
Post by: colin bird on January 10, 2014, 08:27:47 pm

Quote from: Smudger on January 10, 2014, 08:24:51 pm

If I were you I'd remove the solenoid completely until you replace the controller
Should be fitted between the prefilters, undo the hose either side ( or unwind it off the filter housing and replace with a straight bit of hose

Darran

thanks for that will look in the morning

Title: Re: Help please
Post by: colin bird on January 10, 2014, 10:52:16 pm

Guys some of you must have this problem'

All help is appreciated

Title: Re: Help please
Post by: Smudger on January 11, 2014, 01:41:10 pm

So you don't want to bypass it then?

I have a controller from when I removed the system, but it's in use not a spare otherwise you could have that

Darran

Title: Re: Help please
Post by: colin bird on January 11, 2014, 03:05:15 pm

Quote from: Smudger on January 11, 2014, 01:41:10 pm

So you don't want to bypass it then?

I have a controller from when I removed the system, but it's in use not a spare otherwise you could have that

Darran

thanks have sorted it,and filed tsnk