Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: STEVE-UK on January 04, 2014, 11:35:00 am

Title: Controller without low voltage cut out
Post by: STEVE-UK on January 04, 2014, 11:35:00 am

We have 2 brand new transits with factory fitted split charge systems, The varistreams do not seem to run over setting 6 without cutting out

Has anyone found a controller without low voltage cut out?

Title: Re: Controller without low voltage cut out
Post by: Jonny 87 on January 04, 2014, 01:00:24 pm

Is it not your dead end kicking in?

Have you turned the dead end/shut off psi up?

Title: Re: Controller without low voltage cut out
Post by: STEVE-UK on January 04, 2014, 02:13:08 pm

Yep, tried that matey, the battery indicator on varistreams shows 2 bars on both vans

Title: Re: Controller without low voltage cut out
Post by: dd on January 04, 2014, 03:04:22 pm

Do a search on ebay and there is a controller by SafeFlow for £50 incl postage.

Title: Re: Controller without low voltage cut out
Post by: Clever Forum Name on January 04, 2014, 04:12:41 pm

Just take the jumper off from inside and it bypasses the low voltage cutout.

But expect it too seriously damage the battery. I killed a battery in 4 months while working below 10.5V

Title: Re: Controller without low voltage cut out
Post by: Spruce on January 04, 2014, 04:30:13 pm

2 bars on the controller is plenty of power.

When the pump stops, what letter flashes up?