Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: jk999 on December 31, 2013, 12:22:42 pm

Title: 4021 ro
Post by: jk999 on December 31, 2013, 12:22:42 pm

Thinking off buying one off the above , I want to know wheres best place to buy one what I would need and what size resin I would need , my water pressure is around 80 psi I dont think I need a booster pump .I need an ro that can produce a 1000 litres of water in less than a day I would also like to know what the merlin 720 is like cheers kev  :)y

Title: Re: 4021 ro
Post by: robert mitchell on December 31, 2013, 01:04:58 pm

For similar money you can get a 4040 .

Title: Re: 4021 ro
Post by: jk999 on December 31, 2013, 01:15:25 pm

I just need as much info as I can get,  I'm using 300 gpd to at no but its not producing fast enough.

Title: Re: 4021 ro
Post by: robert mitchell on December 31, 2013, 01:49:29 pm

there is only a few quid difference between a 4040 and a 4021 so for producing lots of water quickly i would go for a 4040 .

A hf5 membrane will be fine on 80psi input pressure (will drop to about 55-60 when waste is set to produce)

pre filters can be ten or 20 inch but 20inch will need changing less often , there is also this from gardiners -

http://www.gardinerpolesystems.co.uk/acatalog/EZ-Pure-Sediment-Carbon-Filter-Module---SALE-PRICE-EZ_PURE_CARBON_COMPL.html

expensive to start with but replacement filter costs 28 quid and last for 350000 litres.

Title: Re: 4021 ro
Post by: Mist A Bit on December 31, 2013, 04:16:13 pm

I've just changed from a 300gpd to a 4040 hf5 and its a huge difference, don't compromise buy the right one to begin with

Title: Re: 4021 ro
Post by: jk999 on December 31, 2013, 04:25:32 pm

Eco how much did it cost and where did you purchace it from, cheers kev

Title: Re: 4021 ro
Post by: Mist A Bit on December 31, 2013, 04:28:29 pm

Quote from: jk999 on December 31, 2013, 04:25:32 pm

Eco how much did it cost and where did you purchace it from, cheers kev

I got the membrane from gaps water I think about 260 quid and a stainless steel housing from vyair for 119 , fixtures and fittings apx another 50 quid also brought 20" pre fiters

Title: Re: 4021 ro
Post by: jk999 on December 31, 2013, 11:29:46 pm

So I'm looking at between 400to 500 pounds for a set up

Title: Re: 4021 ro
Post by: Mist A Bit on January 01, 2014, 09:28:02 am

Quote from: jk999 on December 31, 2013, 11:29:46 pm

So I'm looking at between 400to 500 pounds for a set up

Yes you,l be about right at that .

Title: Re: 4021 ro
Post by: jk999 on January 01, 2014, 11:34:18 am

Cheers eco

Title: Re: 4021 ro
Post by: LBWCS on January 01, 2014, 04:08:13 pm

What is the waste ratio in these products?