Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: supernova77 on December 23, 2013, 05:43:55 pm

Title: John Guest Fittings
Post by: supernova77 on December 23, 2013, 05:43:55 pm

Hi All,

I'm going to be plumbing the tank / pumps into my new van over the next week or so...

I want to use John Guest fittings... I'll be using 1/2 inch braided hose in the van - Do I need 15mm John Guest fittings or a different size?

Thanks,
Andy  ;)

Title: Re: John Guest Fittings
Post by: Alex Gardiner on December 23, 2013, 05:53:18 pm

Quote from: Andy* on December 23, 2013, 05:43:55 pm

Hi All,

I'm going to be plumbing the tank / pumps into my new van over the next week or so...

I want to use John Guest fittings... I'll be using 1/2 inch braided hose in the van - Do I need 15mm John Guest fittings or a different size?

Thanks,
Andy  ;)

If using 1/2" braided hose then you would need some kind of adapter to use with John Guest 1/2" fittings. This type of connector would do the job. It will allow you to connect 1/2" hose to 1/2" John Guest fittings.

(http://www.gardinerpolesystems.co.uk/acatalog/JG_Tube_hose_barb_125pd.jpg)

These can be bought from many online suppliers including ourselves - http://www.gardinerpolesystems.co.uk/acatalog/1-2-inch-john-guest-stem-to-1-2-inch-barb.html

Title: Re: John Guest Fittings
Post by: bobplum on December 24, 2013, 02:23:28 pm

not sure if i am reading this right, but if you are use 1/2 inch braided hose and wish to put a 1/2 / 15 mm john guest on the end of it then 15 mm copper will fit into the comprehension end of the braided hose and into the john guest