Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: derikraven on December 20, 2013, 06:01:58 am

Title: advice on Vac motor please
Post by: derikraven on December 20, 2013, 06:01:58 am

I've got an Extracta machine fitted with a "Supavac" which has just burnt out. As this vac costs  a fortune to replace does anyone know of an alternative cheaper unit. Any info would be greatly appreciated

Title: Re: advice on Vac motor please
Post by: Steve Chapman on December 20, 2013, 06:10:39 am

Hi Derik,

I replaced both the big motors on my excel with the standard 5.7 ones and haven't noticed any difference in performance, they also seem to last longer!

You need to make a few minor adjustments inside but it's worth doing as so much cheaper !

Regards
Steve

Title: Re: advice on Vac motor please
Post by: gr cleaning solutions on December 20, 2013, 06:54:29 am

I did the same as Steve said when my vac motor went because Extracta are far to dear

Title: Re: advice on Vac motor please
Post by: derikraven on December 20, 2013, 07:31:32 am

so where is the best place to buy these motors?

Title: Re: advice on Vac motor please
Post by: Steve Chapman on December 20, 2013, 08:33:54 am

Any 3 stage 5.7 tan motor will do but you will need a matching pair if you have two vacs ,

Plenty on eBay or wcsuk

Title: Re: advice on Vac motor please
Post by: Russ Chadd on December 20, 2013, 02:32:25 pm

Speak to Alltec... they deal in the Electro brand 5.7 motors

Title: Re: advice on Vac motor please
Post by: Kinver_Clean on December 20, 2013, 11:34:31 pm

I have converted several machines from 7.2" to 5.7" vac units. There is very little difference in performance. A short steel bracket has to bridge the gap between the supports and motor mounts, depending on original mounts. As long as the connections are airtight and the units do not move they are fine.
Nice little job for Boxing day.