Clean It Up
UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: Russ Chadd on December 16, 2013, 07:26:55 pm
-
This question goes out mainly to owners of dry solvent cleaning equipment owners,
I have an Ashby's Sensai which has the hot circulating solvent system, nice machine...
Had a new uprated 150 psi solvent ready surflo pump fitted by Ashby's and it works great at that pressure for wet cleaning but for solvent cleaning i find it a little too fierce.
What in your opinions is the best pressure to operate dry solvent cleaning? the tools i use both have 0.5 nozzles fitted.
-
Just set it till it cleans, it will vary depending on material and soiling. You don't want to be forcing the fluid through the fabric as its expensive stuff.
-
Dri cleaning solvent should go through a fine jet, is there a by pass to reduce the flo?
-
Cheers guys, there isnt a bypass as such however i can fit a flow valve to the recirculating hose... anyone know where i can get an inline flow valve with the usual 1/4 fittings which will give me quite precise control.?? and doesnt stick out so it doesnt snag on anything!
I guess it would have to be similar to whats on the Sapphire...
-
Hi Russ is there not a flow control on tre side the same as a Ninja?
-
No Adrian... that simply re directs the pump to either feed from the main water tank or from a bottle of solvent so there is not flow control for the solvent