Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: stevon on November 06, 2013, 05:15:06 pm

Title: varisteam
Post by: stevon on November 06, 2013, 05:15:06 pm
I have got the old type push button varisteam but the water pressure is to high.i was told you can adjust it from inside.i need it on a low setting.can any one help.
Title: Re: varisteam
Post by: Spruce on November 06, 2013, 05:25:26 pm
Undo the 4 screws on the front and carefully pull the front cover off. It has a rubber gasket which can tear.

There is a blue dash pot on the circuit board which is the adjuster. You need a very small screwdriver to turn it. If you look very carefully there is an arrow and either numbers or letters on the outside of the dial - I can't remember which. The higher the letters/figures the higher the pressure, so just turn it down a couple of letters/figures and try it.
Title: Re: varisteam
Post by: stevon on November 06, 2013, 05:30:54 pm
thanx for your help will try this out this week.