Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Stoots on October 13, 2013, 10:13:08 am
-
Hi. im wanting to setup a wfp based window cleaning business, have got some drips of info but am still unsure on exactly what i need and how to set it all up. im wanting it to be van based and DIY as cheap as possible. Can anyone help or point me to any reading on the subject? i live in leeds ive heard this is a soft water area? not sure how this affects things but ive heard it does. any info greatly received. adam
-
First step is to buy a tds meter and check your tds , type in pure freedom into Google search engine and have a look on their website, I purchased their diy system, very easy to fit
-
ive also built systems from pure freedom and you wont have any problems, just get the tank secured in the back of the van
-
First step is to buy a tds meter and check your tds , type in pure freedom into Google search engine and have a look on their website, I purchased their diy system, very easy to fit
The reason why Panorama rightly advised your first purchase must be a tds meter is so you know which system to buy.
once you have done that, resurrect this thread and tell us what your reading is. The forum will be in a better position to advise the di or r/o route.
You will always need your tds meter when using wfp.
-
Im in Huddersfield and tds is about 70 ppm, I also have family in Burnley and tds is exactly same there at 70 ppm. So im guessing your tds wont but that far from 70 ppm. ;D
-
thats good news for you then :-)
-
measured at 234. :(
any advice on a setup please? trolley or van?
-
measured at 234. :(
any advice on a setup please? trolley or van?
WELL.............You have Very very hard then! You checked it right?
Plus I glad I don't have that issue up here.
-
You will need a RO and DI to clean the water of minerals. I would go straight for van mount, I purchased mine from pure freedom and I got the diy unit, very very easy to fit . What van do you have ?
-
My tds Adam is 400+
-
lol is there a procedure for checking it?