Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: neiljoust on October 11, 2013, 02:54:11 pm
-
Hi i brought a water heater from corwood sometimes it works then stops then dont come back on , i have changed battreys just wondering if my heater is to high in the van and the pump is at the bottom near the tank just wondering have you got any advice please
-
I've got the fog wash if the pressure of the water flow is too fast it will cut out
-
i have it on 40
-
on any flow setting it starts up then cuts out
-
Is the flu clear? any sharp bends in your exhaust outlet chimney (if uve attached one) or have it positioned in a tight space, can cause it to switch off, as it prob has a safety cut out on it the stop a c o build up when the fumes cant escape.
-
will try and move more central to the doors would cheap battreys help with no ignition
-
Try a new set of batterys, and maybe temp hang it on the back door and retest it all connected up.But if u can hear the click click click sound your batts are fine as its trying to fire up.
-
it fires up then after i turn the hose off it goes out then wont start up again
-
it could be a case of getting the settings right, ie gas ratio to water ratio
-
tried all settings but still does it , i have a Renault trafic and the middle is boarded out so the sliding door is separate to back and the heater is on the left against the wall it was fine i did put cheap batteries in tho does that make a difference
-
When u turn it off, it should fire back up as soon as u open the tap on your reel. as it should detect the water flow. But this is what its like on on fogwash, but yours looks different with that square open flue if thats the 1 uve got. The best thing 2 do would be to talk to corwoods if all these things dont work mate. good luck m
-
Thank mate rang them but they said someone should ring on monday lol