Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: yo748 on September 14, 2013, 08:59:08 pm
-
Has any one had any problem with the pure water products membranes.
When i purchased the system in 2010 it was coming out at 12 so the resin was producing 2500 to 3000+ liters per resin change
Got 3 new ones last july which only came out at 29. now does less than 1000 ltrs per resin change
3 new ones this year out at 37, this was july, now coming out at 52. now 500 ltrs per resin change
theres a few of us who are having the same problem.
Our water from the tap is between 250 and 390, the membrannes should deal with 97% i have been told, so sholud be coming out the ro at around 12.
is it the membranes ?
any help would be very welcome
thanks
-
you saying you got new membrane or resin?
take a look at this page.. read the text right at the bottom it may provide u with some info http://www.gapswater.co.uk/acatalog/copy_of_copy_of_Membranes_used_in_window_cleaning_water_fed_pole_systems-1.html
-
Who ever told you 97% is not right. Manufactores only claim 10%. on a R/o. You will have a change in water out of the tap and also no all membranes are the same.
If your membrane is struggling to bring the TdS down the resin use will go a lot faster as it is doing a job beyond its scope.