Clean It Up
Market Place => Used Equipment For Sale/Wanted => Topic started by: Ian101 on September 06, 2013, 03:51:55 pm
-
Time to pass my pressure washing kit onto a new owner as upgrading to a Zeta in the very near future.
Flat surface cleaner, water butt, 10 metre hose, suction hose, turbo nozzle and normal lance, bought all this off Simon @ Pristine Pathways earlier this year for £600 and not really pushing it made many times that.
Simon very kindly serviced pressure washer before I took it over and Ive prob done about 50 hours since.
Honda GX390 is 14 HP with proper Interpump 250 bar / 15 ltrs a min flow.
Just looking for my money back on it.
If it dont sell on here will Ebay it next week or just keep it as a spare.
-
When will it need servicing again? What will that entail?
Flat surface cleaner-is that like a whirl away but not branded?
Can you post rough dimensions of the pressure washer please?
Just to clarify-how much would you take?
Where abouts are you?
-
When will it need servicing again? What will that entail?
Flat surface cleaner-is that like a whirl away but not branded?
Can you post rough dimensions of the pressure washer please?
Just to clarify-how much would you take?
Where abouts are you?
servicing again = will read manual and post later
not branded correct
will measure it later but prop 18 inches
dimensions of pressure washer ?????????????????????????
£600 which it will do on ebay easily
Hawarden North Wales about 5 miles from Chester
Will put photo up later
-
http://www.tech-clean.co.uk/index.php/products/pressure-washersdrain-jetters/
http://www.tech-clean.co.uk/index.php/products/flat-surface-cleanersrotary-washers/
Thats the washer and flat surface cleaner, thats were I got them new. Sold to ian last year.
Bargin run forever in fact I might buy it back!
Simon
-
http://www.tech-clean.co.uk/index.php/products/pressure-washersdrain-jetters/
http://www.tech-clean.co.uk/index.php/products/flat-surface-cleanersrotary-washers/
Thats the washer and flat surface cleaner, thats were I got them new. Sold to ian last year.
Bargin run forever in fact I might buy it back!
Simon
I will do free delivery just for you ;D
-
Do you have pictures and /or a contact telephone number please?
-
When will it need servicing again? What will that entail?
Flat surface cleaner-is that like a whirl away but not branded?
Can you post rough dimensions of the pressure washer please?
Just to clarify-how much would you take?
Where abouts are you?
servicing again = will read manual and post later
not branded correct
will measure it later but prop 18 inches
dimensions of pressure washer ?????????????????????????
£600 which it will do on ebay easily
Hawarden North Wales about 5 miles from Chester
Will put photo up later
I've got a space at the side of my reel where my existing pressure washer goes, if it'll fit in the same space I'll go for it...
Thanks
-
Ian which zeta are you getting I have the 23ltr p/min @ 3600 psi fantastic machine you won't be sorry
-
Do you have pictures and /or a contact telephone number please?
-
Do you have pictures and /or a contact telephone number please?
yes will take some later and post them up with number.
-
When will it need servicing again? What will that entail?
Flat surface cleaner-is that like a whirl away but not branded?
Can you post rough dimensions of the pressure washer please?
Just to clarify-how much would you take?
Where abouts are you?
servicing again = will read manual and post later
not branded correct
will measure it later but prop 18 inches
dimensions of pressure washer ?????????????????????????
£600 which it will do on ebay easily
Hawarden North Wales about 5 miles from Chester
Will put photo up later
I've got a space at the side of my reel where my existing pressure washer goes, if it'll fit in the same space I'll go for it...
Thanks
I will take some photos later and post measurements as well
-
Ian which zeta are you getting I have the 23ltr p/min @ 3600 psi fantastic machine you won't be sorry
yup thats the one from Malcolm at Malcleanse
-
Looked at handbook and its due an oil change with air filter change then good for another 50 hours.
Pump is Interpump 44 series WW965C 250bar @ 15 litres per minute rating.
Height from floor to top of handle is 31 inches
Length from top of handle to other end is 40 inches
Width from wheel to wheel is 27 inches
1 tyre has a slow puncture
exhaust heat shield rattles
petrol cap fits loosely so tip it to far back with full tank and it will leak
my phone number is 0754 006 5555
-
Due to me looking though all of the 148
Of the most boring photos that you have mistakingly
Posted,
And as I am upset I didn't fine anything incriminating
Ill give ye £300 mr Ian ;)
-
Ian which zeta are you getting I have the 23ltr p/min @ 3600 psi fantastic machine you won't be sorry
yup thats the one from Malcolm at Malcleanse
Have you not tried dual pumps? i'm sure they're the manufacturers of the machine in the first place.
-
Due to me looking though all of the 148
Of the most boring photos that you have mistakingly
Posted,
And as I am upset I didn't fine anything incriminating
Ill give ye £300 mr Ian ;)
U not a bike fan then lol
-
Ian which zeta are you getting I have the 23ltr p/min @ 3600 psi fantastic machine you won't be sorry
yup thats the one from Malcolm at Malcleanse
Have you not tried dual pumps? i'm sure they're the manufacturers of the machine in the first place.
Thats handy info cheers
-
Not for me, thanks for the extra info though
-
Ian which zeta are you getting I have the 23ltr p/min @ 3600 psi fantastic machine you won't be sorry
yup thats the one from Malcolm at Malcleanse
Have you not tried dual pumps? i'm sure they're the manufacturers of the machine in the first place.
Thats handy info cheers
you may have a big wait was told yesterday 3 wk del from d pumps bloody useless!