Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: Aztec Services on September 01, 2013, 09:43:35 pm

Title: ashbys ninja
Post by: Aztec Services on September 01, 2013, 09:43:35 pm

hi guys

anyone using a ninja with 2 x 1500 watts motors in series and a 135 shurflo pump with a brush motor if so  you are do. find this set up reliable.



many thanks

paul condon aztec services.

Title: Re: ashbys ninja
Post by: JandS on September 02, 2013, 10:15:06 am

I use a similar set up only with a 400psi pump and has been fine for over 4 years now.
Changed both vacs...one of them twice and had new seals fitted in pump.

Title: Re: ashbys ninja
Post by: Aztec Services on September 03, 2013, 07:34:11 pm

thanks for the info

are you u using 2x1500 watt motors with you 400 psi pump and do you have any problems with fuses blowing or
curcuit breakers triping.


many thanks

Paul Condon Aztec Services

Title: Re: ashbys ninja
Post by: JandS on September 04, 2013, 09:41:59 am

Yes and no not blown a fuse for a couple of years now.
The plug sometimes gets quite hot but the engineer that does bits for me says that's to be expected.

Title: Re: ashbys ninja
Post by: Paul Redden Countryfresh on September 04, 2013, 07:21:39 pm

I'm using a ninja with two 1500 wt vacs with airseal. I have never had vacs last so long as well as brushes,
i use it everyday too, on other vacs i used to replace brushes every 6 months.
I have the 135 psi pump after four years pressure getting weak but working well.

I replace leads and plugs regularly and dont trip fuses.