Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Mr.G on August 17, 2013, 05:20:41 pm
-
Hi, I have a problem with leaking resin.
It's a DI which is built into a RO system
I'm finding resin in my water storage tank, also lots in the outer canister that contains the DI resin holder.
The TDS also is rising very quick..
anyone got any ideas?
thanks.
-
Ditch it - leave it empty and get an 11 ltr di vessel
Darran
-
depending what setup you have and size, you might be missing some foam filters on it! do you have any pics or links to the one you have?
-
I don't have a pic, but it looks a bit like this-
http://www.ro-man.com/shop/index.php?route=product/product&path=93&product_id=100
the right hand canister is the DI,
there's no foam filters in it at all! should there be?
-
normally there is a plastic tube which goes inside the housing in the picture inside this tube there is a foam filter at the top and the bottom
-
I don't have a pic, but it looks a bit like this-
http://www.ro-man.com/shop/index.php?route=product/product&path=93&product_id=100
the right hand canister is the DI,
there's no foam filters in it at all! should there be?
is the resin canister insert that you fill with resin got a grill at the bottom of it, then another one that you put ontop after the resin then a lid??
-
Basically inside the "outer" canister, I have a "inner canister" that holds the resin
this inner one has a grille at the bottom,
and a lid (with no grille) slides on the top
A thick white plastic washer on top of that inner lid.
An O ring between the outer canister and its screw on lid (but no O ring or seal between the inner canister and its (push on) lid
No foam filters.
I hope that makes sense!
thanks for all the replies so far!
-
Basically inside the "outer" canister, I have a "inner canister" that holds the resin
this inner one has a grille at the bottom,
and a lid (with no grille) slides on the top
A thick white plastic washer on top of that inner lid.
An O ring between the outer canister and its screw on lid (but no O ring or seal between the inner canister and its (push on) lid
No foam filters.
I hope that makes sense!
thanks for all the replies so far!
thought so, its like Michael said, there should be a foam filter in there, so basically
you should first put in the foam filter
then resin
then foam filter
then grille
then lid