Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: andyralph on August 04, 2013, 12:20:25 pm

Title: any advice please
Post by: andyralph on August 04, 2013, 12:20:25 pm

hi all useing a merlin at the moment need to get a new ro  system any ideas or advice on best one to use thanks andy

Title: Re: any advice please
Post by: goldoak on August 04, 2013, 12:22:39 pm

bin it,
get a 4040 hf5

Title: Re: any advice please
Post by: andyralph on August 04, 2013, 12:40:22 pm

best place to buy one from cheers

Title: Re: any advice please
Post by: DeLuce on August 04, 2013, 02:44:40 pm

If you don't fancy going down the 4040 route, then Purefreedom do an RO system from the 300s to 450gpd. Depends if you have a big round where you're drawing off your water every day of the week then maybe a 450gpd won't keep up.
I've had my Purefreedom Ro setup for a few years now and its been very reliable.

Title: Re: any advice please
Post by: Flash.. on August 04, 2013, 03:13:51 pm

Whats wrong with a Merlin, fills my 650l tank every night in a couple of hours although the waste water is a little high, ; if your on a meter ;)

Title: Re: any advice please
Post by: Jim Waugh(Albright & Shiny) on August 04, 2013, 09:21:25 pm

I just bought an Ez Pure HF5 system from Gardiners… C'est des testicule de Chien..  takes my TDS for 295 down to 7 at 40PSI… can't wait to get a booster pump on it….

Title: Re: any advice please
Post by: andyralph on August 05, 2013, 11:32:50 am

how mch waste water do u get

Title: Re: any advice please
Post by: formb on August 05, 2013, 01:09:02 pm

Quote from: Jim Waugh

I just bought an Ez Pure HF5 system from Gardiners… C'est des testicule de Chien..  takes my TDS for 295 down to 7 at 40PSI… can't wait to get a booster pump on it….

Ha.

Google translate:

It's testicle Dog!!!

Title: Re: any advice please
Post by: andyM on August 05, 2013, 01:11:42 pm

Quote from: Soupy on August 05, 2013, 01:09:02 pm

Quote from: Jim Waugh

I just bought an Ez Pure HF5 system from Gardiners… C'est des testicule de Chien..  takes my TDS for 295 down to 7 at 40PSI… can't wait to get a booster pump on it….

Ha.

Google translate:

It's testicle Dog!!!

He has a dog with one ball?  ???

Title: Re: any advice please
Post by: Spruce on August 05, 2013, 01:17:49 pm

As a single operator a 4021 will produce more than enough water for your daily requirements, especially if you process water into an ibc tank.

http://www.daqua.co.uk/ro_systems.htm

Merlins are renowned for a high water waste and poor membrane efficiency. My mate down the road has had 2 Merlins. They produce water fast but his has a waste to pure of about 5 to 1 and both of his Merlins have never achieved more than a 90% rejection rate which equals higher resin costs.

We have a 4040 now which keeps up with the 3 of us drawing from it.

Title: Re: any advice please
Post by: andyralph on August 05, 2013, 03:13:09 pm

hi spruce is yours a 4040 hf5

Title: Re: any advice please
Post by: Jim Waugh(Albright & Shiny) on August 05, 2013, 03:25:53 pm

Quote from: andyM on August 05, 2013, 01:11:42 pm

Quote from: Soupy on August 05, 2013, 01:09:02 pm

Quote from: Jim Waugh

I just bought an Ez Pure HF5 system from Gardiners… C'est des testicule de Chien..  takes my TDS for 295 down to 7 at 40PSI… can't wait to get a booster pump on it….

Ha.

Google translate:

It's testicle Dog!!!

He has a dog with one ball?  ???

Thats my uneducated attempt at Its the dogs Bolleaux in french… … lol lol