Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Mitchellmoxo on July 22, 2013, 09:42:20 pm
-
I am only going for a 100gpd as Im starting with a trolley & a few 25L barrels in the van (on a low budget).
Will this system be ok? If not any reccomendations for this price range?
http://www.ro-man.com/shop/index.php?route=product/product&path=22_91&product_id=318
Thanks
-
Thats how I started out. I would strongly suggest you go for a higher output of at least 200gpd. You will soon end up trying to fill a dozen barrels a day and only the evening free to do it. If pos go to 300gpd
-
great thanks,
but would this system be good enough at purifiying the water?
thanks
-
depends on your tap TDS. Mine is about 125 and 70 psi and was producing water at zero tds. Wish my 4040 unit would do that. The smaller units are more efficient. If its below 10 then it will clean windows ok if you give a good rinse. Other wise a DI resin vessel might be needed between the unit and barrels.