Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: herbiefatboy on July 18, 2013, 07:00:02 pm

Title: R.O QUESTION
Post by: herbiefatboy on July 18, 2013, 07:00:02 pm

hi all if your water coming out of tap reads 347 what should a 4040 ro get it down to before resin thanks.

Title: Re: R.O QUESTION
Post by: andyM on July 18, 2013, 07:07:08 pm

Anything between 0ppm to 18ppm I reckon if membranes are in good condition.

Title: Re: R.O QUESTION
Post by: herbiefatboy on July 18, 2013, 07:10:01 pm

wow I can not seem to get it under 36.

Title: Re: R.O QUESTION
Post by: dave0123 on July 18, 2013, 07:14:28 pm

It all varies loads depending on tap tds water pressure and water flow the temperature etc

Title: Re: R.O QUESTION
Post by: andyM on July 18, 2013, 07:16:30 pm

Yeah if the membrane is new and you are only getting 36ppm out of it you probably need a booster pump then.