Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: matty72 on July 15, 2013, 08:11:14 pm
-
Anyone any advice on pressure switch, has stopped working and pressure just builds up,pump is only couple of months old, any ideas on how to identify the problem, cheers guys.
-
Anyone any advice on pressure switch, has stopped working and pressure just builds up,pump is only couple of months old, any ideas on how to identify the problem, cheers guys.
Do you mean that the pressure switch is not cutting the pump off?
What make of pump is it?
-
Hi Alex it's the shurflo, the pressure just seems to build and my digital reader that controls the water doesn't cut in with letter p, it just stays on number four and then when i switch water back on with tap near pole its like a jet wash, any ideas.
-
Hi Alex it's the shurflo, the pressure just seems to build and my digital reader that controls the water doesn't cut in with letter p, it just stays on number four and then when i switch water back on with tap near pole its like a jet wash, any ideas.
It sounds like your digital controller (sounds like a varistream) needs the calibration for the shut-off setting turning down. If you look in the units instructions it should tell you how to do this - some of these need the cover removing and a calibration switch changing, others have an external control.
-
Okay thanks for that Alex i will try to find out how to do it, it is a varistream.
-
Okay thanks for that Alex i will try to find out how to do it, it is a varistream.
Is it a digital one mate if so I can e-mail you the calibration instructions
Paul
-
it's a digital one mate, i press and hold the two buttons down which gives you letters A to F, im not sure this does the trick, if you can send the detals as well mate appreciated.
-
Ok ,will send them in the morning