Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: Harry Roberts on June 25, 2013, 06:00:38 pm

Title: Switching from air flex turbo to enforcer
Post by: Harry Roberts on June 25, 2013, 06:00:38 pm

Hi.
Just wanted to know if anyone has made the switch from turbo to enforcer ?
If so how do they compare.

I think steve has switched ?

What's it like steve??

Cheers.

Title: Re: Switching from air flex turbo to enforcer
Post by: Steve Barnett (Carpet Care Plus) on June 25, 2013, 07:49:26 pm

I can honestly say, that at the wand, my twin vac enforcer feels more powerful than my triple vac turbo.

Plus I've now gone back to a in-tank heater.

I like to change my machines every 3 years and the enforcer has definitely been a good purchase.

Title: Re: Switching from air flex turbo to enforcer
Post by: Shaun_Ashmore on June 25, 2013, 07:51:44 pm

What benefits have you seen frothe heater?

Drying or cleaning?

Shaun

Title: Re: Switching from air flex turbo to enforcer
Post by: Steve Barnett (Carpet Care Plus) on June 25, 2013, 07:54:56 pm

Better drying times, I've now switched to chemspecs products so I'm getting better cleaning results as well  - I'm almost a professional now ! :)

Title: Re: Switching from air flex turbo to enforcer
Post by: Maurice Brown on June 25, 2013, 08:06:30 pm

What's the noise level like compared to the Airflex?

Title: Re: Switching from air flex turbo to enforcer
Post by: Shaun_Ashmore on June 25, 2013, 08:07:51 pm

Steady on  ;D

Shaun

Title: Re: Switching from air flex turbo to enforcer
Post by: Maurice Brown on June 25, 2013, 08:26:57 pm

Shaun...  Don't mean to knock either machine.  I run an airflex turbo at present and more than happy with it's performance.  Just curious as to whether or not the enforcer was a quieter running machine with only two vacs.

Title: Re: Switching from air flex turbo to enforcer
Post by: Harry Roberts on June 25, 2013, 08:46:19 pm

Hi Steve.
Interesting

Title: Re: Switching from air flex turbo to enforcer
Post by: Harry Roberts on June 25, 2013, 08:48:27 pm

Hi steve.
Interesting on the machines.

I'm with you on chemspec.
I use all from them and find them so much better than the rest.
Had some great results from dye gone.

H

Title: Re: Switching from air flex turbo to enforcer
Post by: Steve Barnett (Carpet Care Plus) on June 25, 2013, 09:02:41 pm

The enforcer is marginally quieter, but i'm usually 50-75 feet away so it's not my problem    ;D

Title: Re: Switching from air flex turbo to enforcer
Post by: jim mca on June 25, 2013, 09:41:07 pm

Steve

What vacuum motor set up did you get

Jim

Title: Re: Switching from air flex turbo to enforcer
Post by: Russ Chadd on June 25, 2013, 11:07:37 pm

I too have an Enforcer and I am very happy with mine.
The in tank heater works great and provides water at just the right temperature for upholstery and wool carpets... If I need really hot water I just attach my external V2 inline heater.

This machine has been designed and built by Ashbys and the body is exclusive and not made for anyone else.
My two 5.7 electro motors work very well and provide enough lift and airflow for 100' of 2 inch... Dry times are also impressive and on most domestic carpets I only need to rinse 120 psi thanks to excellent flow.

Before you make your mind up get a demo...

Title: Re: Switching from air flex turbo to enforcer
Post by: Shaun_Ashmore on June 26, 2013, 07:40:27 am

What jets are you using on your wand Russ ?

Shaun

Title: Re: Switching from air flex turbo to enforcer
Post by: Russ Chadd on June 26, 2013, 09:40:46 am

I Believe they are 11003 x 2 Shaun
The same as my Express... Which allows me to share the wand between machines :-)