Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: ben M on June 24, 2013, 12:46:56 pm

Title: help connector
Post by: ben M on June 24, 2013, 12:46:56 pm

need a connector to adapt on my RO 4040 (bottom screw)
Which one do i have to buy please?

Thanks

Ben

Title: Re: help connector
Post by: ben M on June 24, 2013, 06:12:31 pm

i said please  ;D

Title: Re: help connector
Post by: ben M on June 24, 2013, 06:32:46 pm

something to fit this housing (bottom or top screw)

http://www.gapswater.co.uk/acatalog/AXEON-PVC-RO-Membrane-Housing-4--x-40---Champ-4040--2940.html

Title: Re: help connector
Post by: bobplum on June 24, 2013, 06:48:27 pm

when i looked straight away i thought 1/2 inch and then noticed on the pic it gives two options  and one is 1/2 inch

you can probably just get a copper 1/2 inch straight connection from a plumbing suppliers shop

Title: Re: help connector
Post by: ben M on June 24, 2013, 07:56:11 pm

i need 1/2 inch, which one do you use guys?

Title: Re: help connector
Post by: ben M on June 24, 2013, 08:30:59 pm

what do you use guys to connect your RO 4040 to the DI?

Title: Re: help connector
Post by: Smudger on June 24, 2013, 08:54:42 pm

Your link gives 2 options but you have mentioned 1/2 inch
You can get any 1/2 inch bsp/ bspf/gas threaded horsetail off eBay or hire shops that deal in pressure washers or industrial vacuums or hydraulic suppliers such as pirteks

HTH

Darran

Title: Re: help connector
Post by: ben M on June 24, 2013, 09:03:08 pm

Quote from: Smudger on June 24, 2013, 08:54:42 pm

Your link gives 2 options but you have mentioned 1/2 inch
You can get any 1/2 inch bsp/ bspf/gas threaded horsetail off eBay or hire shops that deal in pressure washers or industrial vacuums or hydraulic suppliers such as pirteks

HTH

Darran

Any link please Darran?

Title: Re: help connector
Post by: ben M on June 24, 2013, 10:24:40 pm

maybe Alex Gardiner can help?

Title: Re: help connector
Post by: Alex Gardiner on June 24, 2013, 10:32:53 pm

You would need one of these - http://www.gardinerpolesystems.co.uk/acatalog/john-guest-1-2-inch-push-in-fitting-to-1-2-inch-male-screw-bspt-thread.html
For use with John Guest tubing which is what I would recommend.

Or you could use these http://www.gardinerpolesystems.co.uk/acatalog/nylon-male-screw-thread-to-hose-barb-fittings.html you would need the 1/2" screw to 1/2" barb. This would be for use with 1/2" reinforced hose.

Title: Re: help connector
Post by: ben M on June 25, 2013, 09:36:41 am

Thank you very much Alex  :)