Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Total shine cleaning services on May 08, 2013, 11:10:37 pm
-
ordered yesterday, arrived this morning and fitted them to a clx 27, my pole has stopped spinning and collapsing, me not stressed anymore
graham
-
ordered yesterday, arrived this morning and fitted them to a clx 27, my pole has stopped spinning and collapsing, me not stressed anymore
graham
i will do mine at the wknd...got a new pole to play with tomorrow.
-
what u bought.?
graham
-
what u bought.?
graham
slx22 had the clx22 for 3 years its earnt its retirement! the clamps are for my 30ft slx
-
was there enough glue in them sachets graham? i expect alex would send enough, they just look small to me :-\
-
just about, I had no instructions, there was one clear and one black, I mixed them so I hope I done it right, on my way out in a min so will soon find out
graham
-
was there enough glue in them sachets graham? i expect alex would send enough, they just look small to me :-\
There is enough glue in one sachet to do about 10 clamps - there is much more than it looks.
-
just about, I had no instructions, there was one clear and one black, I mixed them so I hope I done it right, on my way out in a min so will soon find out
graham
There are full fitting instructions on this video which is also shown on the Clamp Upgrade product page - http://youtu.be/MUW1WpzfpyE
http://www.gardinerpolesystems.co.uk/acatalog/Gardiner-Smart-Clamp-DIY-Upgrade-Kits-ClampII_SET.html
On this video at 6.15 minutes in it shows how to mix and apply the glue from these sachets.
It is very important when fitting the new clamps that all of the steps in this video are followed exactly to ensure a trouble free bond.
-
just about, I had no instructions, there was one clear and one black, I mixed them so I hope I done it right, on my way out in a min so will soon find out
graham
There are full fitting instructions on this video which is also shown on the Clamp Upgrade product page - http://youtu.be/oz2NiLDIn40
http://www.gardinerpolesystems.co.uk/acatalog/Gardiner-Smart-Clamp-DIY-Upgrade-Kits-ClampII_SET.html
On this video at 6.15 minutes in it shows how to mix and apply the glue from these sachets.
It is very important when fitting the new clamps that all of the steps in this video are followed exactly to ensure a trouble free bond.
This video has been removed by the user ???
-
can't access it Alex, was I right in mixing the satchets..? prior to this I cut off existing clamps with hacksaw, sanded down the top of each section then wiped with them clean with the alcohol wipe, mixed satchets then placed glue on new clamps and placed these onto the sections
graham
-
This video has been removed by the user ???
Duh! I put the link to the old video - here is the correct link - http://youtu.be/MUW1WpzfpyE
-
can't access it Alex, was I right in mixing the satchets..? prior to this I cut off existing clamps with hacksaw, sanded down the top of each section then wiped with them clean with the alcohol wipe, mixed satchets then placed glue on new clamps and placed these onto the sections
graham
I have put the correct link up now which has also been on the website for a few days - http://youtu.be/MUW1WpzfpyE
Sounds good to me.
It is best also to lightly abrade and then wipe the inside of each clamp body. Mixing the glue is best done before opening the sachet. Just squeeze the glue back and forth inside until fully mixed, then cut a corner off and squeeze out as needed. It is best practice to apply glue to both the inside of the clamp body and the section before twisting it together.
-
thanks I think I was thorough enough
graham