Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Ste b on April 30, 2013, 11:03:27 am

Title: Double di size ?
Post by: Ste b on April 30, 2013, 11:03:27 am: Going to change to double di and was wondering what size's would be best. Tap tds is between 70-90. Was going to go with 19L but would i get away with 11L or would i go through resin to quick?

Thanks
Title: Re: Double di size ?
Post by: luther1 on April 30, 2013, 12:43:08 pm: twin 11s would be ideal
Title: Re: Double di size ?
Post by: DG Cleaning on April 30, 2013, 01:33:58 pm: If you get twin 11L then a 25kg bag will fill both with a bit left over.
Title: Re: Double di size ?
Post by: Ste b on April 30, 2013, 02:04:19 pm: 11L it is then , thanks gents
Title: Re: Double di size ?
Post by: luther1 on April 30, 2013, 03:47:07 pm: Only fill 3/4 full btw
Title: Re: Double di size ?
Post by: mikeyfaerosyth on April 30, 2013, 08:58:43 pm: mind just use one vessel at first until tds rises then link other one up.
Title: Re: Double di size ?
Post by: Ste b on April 30, 2013, 10:19:08 pm: Quote from: mikeyfaerosyth on April 30, 2013, 08:58:43 pm
mind just use one vessel at first until tds rises then link other one up.

Whats the point in that. Or was you trying to be funny ? ???
Title: Re: Double di size ?
Post by: luther1 on April 30, 2013, 10:29:58 pm: Quote from: Ste b on April 30, 2013, 10:19:08 pm
Quote from: mikeyfaerosyth on April 30, 2013, 08:58:43 pm
mind just use one vessel at first until tds rises then link other one up.

Whats the point in that. Or was you trying to be funny ? ???

It was good advice. Whats the point of using two di's both with new resin?
Title: Re: Double di size ?
Post by: Ste b on May 01, 2013, 06:43:58 am: Apologies. I thought the point of 2 vessels was to keep tds at 0 then once it rises put second vessel first an new resin in second
Title: Re: Double di size ?
Post by: mikeyfaerosyth on May 01, 2013, 08:09:17 am: cant be bothered explaining,do a search.
Title: Re: Double di size ?
Post by: Ste b on May 01, 2013, 08:48:39 am: Quote from: mikeyfaerosyth on May 01, 2013, 08:09:17 am
cant be bothered explaining,do a search.

Done lots of searches but obviously i got it wrong.
Dont be bothered writing anything in future then ::)roll
Title: Re: Double di size ?
Post by: robert mitchell on May 01, 2013, 09:04:24 am: its simple really .

Use one di until tds starts to rise , when it does add the second di with fresh resin after the used one .

That way the first vessel gets it down to 5 ish then second one to zero , this will save loads of resin as you would normally of just changed the resin and thrown it away.

When it rises again the second di becomes the first and you refill the other vessel with fresh resin.

Hope that explains it , much easier to show than explain.
Title: Re: Double di size ?
Post by: Ste b on May 01, 2013, 09:11:13 am: Thank you, i knew the second part of what you explained but didnt know to start off with just 1. Thanks for explaining
Title: Re: Double di size ?
Post by: ascjim on May 01, 2013, 09:50:33 am: Quote from: luther1 on April 30, 2013, 12:43:08 pm
twin 11s would be ideal
Title: Re: Double di size ?
Post by: mikeyfaerosyth on May 01, 2013, 06:37:34 pm: Quote from: Ste b on May 01, 2013, 08:48:39 am
Quote from: mikeyfaerosyth on May 01, 2013, 08:09:17 am
cant be bothered explaining,do a search.

Done lots of searches but obviously i got it wrong.
Dont be bothered writing anything in future then ::)roll
thought you were the end of a nob,but you have redeemed yourself,can we shake hands ;D
Title: Re: Double di size ?
Post by: Ste b on May 01, 2013, 07:34:51 pm: Thank god for that, il be able to sleep tonight knowing that iv redeamed myself. ;D
Shake hands it is
Title: Re: Double di size ?
Post by: mark m on May 01, 2013, 08:39:45 pm: hope this helps

http://www.youtube.com/watch?v=xLwTAjxDSuM