Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: richywilts on April 27, 2013, 11:00:04 am
-
got booster pump set up to ro but every now and then where i connect hose to ionics filter at start of setup the hose comes out the hoselock and is flooding my unit i think with the pressure it just slowly gets pushed back and then finally pops out
i cant think of anything to stop it jubilee clips wont work
-
Rap some tape round it to beef it up
Or chance the fitting to a male hose tale
And clip it on with a few extra clips
Or something that won't pop off,
-
Barbed hoselock connector with jubilee clip. Have a google should find them.
-
I can't find them >:(
Alex found a link for me once.
-
http://www.gardinerpolesystems.co.uk/acatalog/Quick-Release-Shut-Off-Coupling-with-12-Hose-Barb-QRM_SO_COUPLING_12.html
is it this end(female)
-
that might work cheers carl does that female end fit round a male hoselock part
-
that might work cheers carl does that female end fit round a male hoselock part
Yes m8 as far as I can see.
-
shame there aint a right angle barb coming out off there :(
-
shame there aint a right angle barb coming out off there :(
what for m8, hosereel?
-
I use geka irrigation couplings Richie,they never come off
-
Buy some re-inforced hose ( the clear stuff with nylon strands ) this never works loose
Darran
-
shame there aint a right angle barb coming out off there :(
what for m8, hosereel?
yes carl
-
shame there aint a right angle barb coming out off there :(
what for m8, hosereel?
yes carl
i saw polemans setup and video and thought exactly the same when piecing my new van set up in components.
-
bring to my house and we will sort it together :-*
-
Do away with the female connector altogether. Force the hose over the male connector and then put a jubilee clip on it. I have done this many times, never fails ;)
-
I use geka irrigation couplings Richie,they never come off
+1
best advice so far