Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Carl@Cwc on April 22, 2013, 08:12:14 pm
-
Alex if you have time?
the pro reelworks reels you sell, have you got the fitting kits for them ie microbore etc etc.
im looking to install 2 of these in the back doors on a platform. with drop down guides etc etc
-
Alex if you have time?
the pro reelworks reels you sell, have you got the fitting kits for them ie microbore etc etc.
im looking to install 2 of these in the back doors on a platform. with drop down guides etc etc
Hi Carl
We can certainly supply fittings to allow the use of them with Microbore hose. They have 1/2" female ports on both the centre of the reel and the outside swiveling input. Something like the Pro 026 range can be used on these. I would recommend the following:
For the inlet on the side fit one of these:
http://www.gardinerpolesystems.co.uk/acatalog/pro-026-endstop-to-1-2-inch-screw.html
You would then need one of these on the feed hose from the pump to the reel:
http://www.gardinerpolesystems.co.uk/acatalog/pro-026-hose-tail-13mm-1-2-inch-hose-barb.html
For the centre of the reel you could fit one of these:
http://www.gardinerpolesystems.co.uk/acatalog/brass-male-screw-thread-to-hose-barb-fittings.html - 1/2" thread to 6mm barb
This would allow the use of Microbore hose.
-
Alex if you have time?
the pro reelworks reels you sell, have you got the fitting kits for them ie microbore etc etc.
im looking to install 2 of these in the back doors on a platform. with drop down guides etc etc
Hi Carl
We can certainly supply fittings to allow the use of them with Microbore hose. They have 1/2" female ports on both the centre of the reel and the outside swiveling input. Something like the Pro 026 range can be used on these. I would recommend the following:
For the inlet on the side fit one of these:
http://www.gardinerpolesystems.co.uk/acatalog/pro-026-endstop-to-1-2-inch-screw.html
You would then need one of these on the feed hose from the pump to the reel:
http://www.gardinerpolesystems.co.uk/acatalog/pro-026-hose-tail-13mm-1-2-inch-hose-barb.html
For the centre of the reel you could fit one of these:
http://www.gardinerpolesystems.co.uk/acatalog/brass-male-screw-thread-to-hose-barb-fittings.html - 1/2" thread to 6mm barb
This would allow the use of Microbore hose.
thats why you are the preferred supplier m8.
credit where its due.
what is the lead time on the reels, and have you tried one and honestly do u rate them.
im putting 2 in a permanently fixed position in new van and for me reeling in is the worst part lol
if only they did a 12v , battery connection electric rewind system id deffo get one.
as soon as i confirm new van ill order 2 and the required connectors.