Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: TomCrowther on April 09, 2013, 10:37:00 am

Title: fitting from tank to supply two pumps
Post by: TomCrowther on April 09, 2013, 10:37:00 am

Hi All. I am buying all the bits to fit a new, two man system and wondered if any of you have a fitting, direct from the tank which splits the water? I can only seem to find a fitting that links to another fitting that fits to a john guest T which seems a convoluted way of doing it.
I know I have seen one before, a brass Y fitting that screws directly into the tank, just can't find it now :(

Title: Re: fitting from tank to supply two pumps
Post by: DG Cleaning on April 09, 2013, 10:43:57 am

You can get what you need from any pneumatic supplier, just tell them what you need and what type of connection you have on the tank.
I would recommend a valve before you T off to the pumps though ;D

Title: Re: fitting from tank to supply two pumps
Post by: TomCrowther on April 09, 2013, 11:09:15 am

Thanks DG, yes, going to fit a couple of valves too  :)

Title: Re: fitting from tank to supply two pumps
Post by: bobplum on April 09, 2013, 03:36:35 pm

try context pneumatics supplies in bolton

Title: Re: fitting from tank to supply two pumps
Post by: TomCrowther on April 09, 2013, 06:21:46 pm

Thanks Bob but I think I have sorted it now.

Title: Re: fitting from tank to supply two pumps
Post by: bobplum on April 09, 2013, 08:24:25 pm

did you get the tee piece? if so were from

Title: Re: fitting from tank to supply two pumps
Post by: TomCrowther on April 09, 2013, 10:05:22 pm

G a r d I n e r s had something Bob. Got to spell it like that, using the kindle and it alters spellings it doesn't like.