Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: bobplum on April 04, 2013, 07:14:27 pm
-
it is still 003,mmmm
the resin is new,purefreedom,which i have used before,so any ideas why i can not get down to 000
-
Passing it too quickly through the resin?
-
enough resin in your DI?
-
rammed it in with my ,,,you know what ;D
-
If the riser tube is not seated properly in the head of the vessel then the "in" water can leak through and contaminate the "out" (treated) water
or the riser could be damaged...
-
If the riser tube is not seated properly in the head of the vessel then the "in" water can leak through and contaminate the "out" (treated) water
or the riser could be damaged...
This happened to me. I used plumbers tape at the top of the riser tube to get a good seal
-
can i just mention its a 10 inch vessel not one of the big blue boys
-
Passing it too quickly through the resin?
ian why would it pass too quickly?
-
Is your tds meter reading correctly ???
-
have you got the sky hooks turned on?
As you know 003 will be ok till you figure it out.
What make of resin is it? (so i dont buy any)
Hope you get it sorted
-
Is your tds meter reading correctly ???
brand new
-
have you got the sky hooks turned on?
As you know 003 will be ok till you figure it out.
What make of resin is it? (so i dont buy any)
Hope you get it sorted
whats a sky hook?
purefreedom,never had any trouble in the past
-
have you got the sky hooks turned on?
As you know 003 will be ok till you figure it out.
What make of resin is it? (so i dont buy any)
Hope you get it sorted
whats a sky hook?
purefreedom,never had any trouble in the past
You Don't no what sky hooks are ???
No wonder you can't get water below 003
-
have you got the sky hooks turned on?
As you know 003 will be ok till you figure it out.
What make of resin is it? (so i dont buy any)
Hope you get it sorted
whats a sky hook?
purefreedom,never had any trouble in the past
You Don't no what sky hooks are ???
No wonder you can't get water below 003
WELL GO ON THEN tell me what they are....................i am waiting :D
-
have you got the sky hooks turned on?
As you know 003 will be ok till you figure it out.
What make of resin is it? (so i dont buy any)
Hope you get it sorted
whats a sky hook?
purefreedom,never had any trouble in the past
You Don't no what sky hooks are ???
No wonder you can't get water below 003
WELL GO ON THEN tell me what they are....................i am waiting :D
im still not talking to you over that April fool joke >:( ;D ;D
-
check the black o rings on the cannister
-
have you got the sky hooks turned on?
As you know 003 will be ok till you figure it out.
What make of resin is it? (so i dont buy any)
Hope you get it sorted
whats a sky hook?
purefreedom,never had any trouble in the past
You Don't no what sky hooks are ???
No wonder you can't get water below 003
WELL GO ON THEN tell me what they are....................i am waiting :D
im still not talking to you over that April fool joke >:( ;D ;D
:D there's a lot of people not talking to me over
The April fool joke...
Had a txt today asking if I was still selling !
I kid you not
-
they sell them, they are next too the long stands. I would check they are fitted correctly.
-
they sell them, they are next too the long stands. I would check they are fitted correctly.
Down south we call a "long stand" a "long weight" but spelled differently ...
-
Nr to the glass hammers
And bubbles for spirit levels Bob
-
Passing it too quickly through the resin?
ian why would it pass too quickly?
If you use a booster pump it may push the water through very quickly. This is OK for the RO because the contamination is stopped by the membrane, but resin works by absorbing the contaminants onto the surface of the resin beads. If the water is flowing too quickly through the resin, it doesn't have time to work, so doesn't remove all the contaminants.
-
Contact doug Atkinson. He is the grandaddy of DI resin issues, he will give you the best advice. :)