Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Leigh Taylor on March 27, 2013, 04:07:24 pm

Title: Help needed Ref: 300gpd/ 10" Eco filter system
Post by: Leigh Taylor on March 27, 2013, 04:07:24 pm

Hi

I am running one van off a static 10" Eco filters and 300 GDP membranes.

Recently I replaced all the filters and the RO Membranes and ensured at least I think I did that all the tubing went back where it was before? My TDS is low (before resin)

My problem is my water production is minimal and we're struggling to produce enough for work? I'm scratching my head as to why as TDS is good and I've quadruple checked for leaks and the filters are all fitted correctly!!


Why am I not getting enough water now?? 

Title: Re: Help needed Ref: 300gpd/ 10" Eco filter system
Post by: Gary f on March 27, 2013, 04:33:32 pm

Hi if you have one like mine it as a blue switch that allows flushing and other way water production havent knocked it to flush mode?

Title: Re: Help needed Ref: 300gpd/ 10" Eco filter system
Post by: Leigh Taylor on March 27, 2013, 04:45:55 pm

No I have that and flushed it through for an hour after replacing them and switched back ???

Title: Re: Help needed Ref: 300gpd/ 10" Eco filter system
Post by: gto on March 27, 2013, 04:54:43 pm

did you use the exact same brand of filters

Title: Re: Help needed Ref: 300gpd/ 10" Eco filter system
Post by: Leigh Taylor on March 27, 2013, 05:05:49 pm

No previously I had the standard filters but on suppliers advice was told the Eco filters are the same but cheaper?