Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Small but perfectley formed on March 24, 2013, 07:01:30 am
-
Anyone had problems with the plastic connector that connect hose to spindle coming out after it gets hot , and did you resolve this?.
-
Ive had it on the claber hose reel, i now use the metal hose connectors from Gardiners
-
i use metal one, but can still pop off, jublee clip seem to work for me
-
Not the hose it's the bsp thread comes out of spindle.
-
Oh right, not heard that before,
-
I had this problem with a reel with plastic spindle and Gardener only supply a plastic connector so I glue all the internal fittings with a glue called extreme,its in s silver tube.Never had a problem again.If I need to refit I will cut the hose free. This glue is flexible so works very well.Even the bayonet fitting came loose from the heat so glue that too.
-
They are not made for hot water use. Not the Claber reel, not the PF reel. I've got a Reelworks 460 reel, any pro reel will work fine. 8mm barb.
-
Tim do you use hot with yours and is it a gas heater.
-
Tim do you use hot with yours and is it a gas heater.
Yes, hot all the time, with gas heater. Problem is with most reels is that the hose exerts a lot of pressure when using hot, it completely destroys the Claber reel, and the pf reel has got problems too.
-
Which reel is best with hot ???
-
you can stop this happening with a small bungee holding the parts together, i do this and really like the reals
-
I've had a lot of problems with pf reels when using hot, but they have done all they can to help and in the end I switched to their double stacker hose reel and dare I say it so far so good