Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: zippy on March 13, 2013, 08:36:38 pm

Title: Squeegee to fit Harris pole
Post by: zippy on March 13, 2013, 08:36:38 pm

Hey folks,

Anyone know of any makes of squeegee that can screw fit onto the Harris decorator poles?

I think the Harris poles have an ACME thread (they also have a cone that can be used with any of the push-on squeegee's) but I'm looking for a squeegee with an ACME thread that can screw straight onto the Harris pole.

Regards

Title: Re: Squeegee to fit Harris pole
Post by: Gav Camm lammy 283 on March 13, 2013, 09:17:49 pm

Why ???
Any squeegee wiv do

Title: Re: Squeegee to fit Harris pole
Post by: robertphil on March 13, 2013, 09:49:49 pm

ive found that the best tip to fit on a Harris is the tip  from an ANZA pole ,these are sold alongside the Harris in BnQ . this tip fits perfect on Wagtail and Unger etc squeegees

Title: Re: Squeegee to fit Harris pole
Post by: DG Cleaning on March 13, 2013, 09:54:56 pm

I used to use an Unger Visa Versa which pushed on, not ideal but ok for the odd window.

Title: Re: Squeegee to fit Harris pole
Post by: wfp master on March 13, 2013, 10:09:59 pm

why do you need to screw it on? just push it on. or drill the threaded top off then any blade or applicator will fit.

Title: Re: Squeegee to fit Harris pole
Post by: zippy on March 14, 2013, 06:46:01 pm

Thanks folks ... reason I wanted it to screw on is simply because it winds me up with the push-ons when I apply to much pressure and it pops off then comes tumbling down and I have to dodge it!

Title: Re: Squeegee to fit Harris pole
Post by: richard jagger on March 15, 2013, 12:32:10 pm

Wrap some insulation tape around and the squeegee will fit better.