Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Simply Clean Windows on February 18, 2006, 09:27:39 pm

Title: wiring varistream to flojet
Post by: Simply Clean Windows on February 18, 2006, 09:27:39 pm

need help with wiring varistream to flojet!!!!!!!!!!!!HELP

Title: Re: wiring varistream to flojet
Post by: Roy Harding on February 18, 2006, 10:19:30 pm

Its Simple just use the 2 wire coming from the rear of the pump, Black to black and orange to the red of the vairiestream marked pump.

The other red and black go to  the battery, red to the positive and black to the negative.

Roy

Title: Re: wiring varistream to flojet
Post by: Simply Clean Windows on February 19, 2006, 06:58:34 am

cheers,but what about the red wire that goes from top of pump to the bottom of the pump

Title: Re: wiring varistream to flojet
Post by: tom_currie on February 19, 2006, 08:08:36 am

disconect the wire that goes to the pressure switch it is no longer required

Title: Re: wiring varistream to flojet
Post by: Simply Clean Windows on February 19, 2006, 08:29:29 am

cheers for that tom

Title: Re: wiring varistream to flojet
Post by: pjulk on February 19, 2006, 02:39:06 pm

With the flojet you can't disconnect the wires from the pressure switch.

So what i did the two wires that go from the front to back i cut in the middle and connected the cut wires that go to the front of the pump to my varistream and put insulation tape on the other cut ends as they are not needed.

This way if the varistream packs in you can rejoin the pump wires.

Paul