Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Ben wood on February 11, 2013, 09:07:08 pm
-
Has anyone had a system fitted by them if so what are they like
-
Thought you were off to Pure Freedom ( Best IMHO )
-
dont think they fit systems! there only a supplier not a main dealer
-
Oh whats occurring? I gots a mate who lives in Barry I do, her names Nessa. give her a call she'll look after yous while your there...tidy!
-
Woods what kind of system do you want? water volume? DI only or RO? heated or cold? etc etc
In a perfect world all the working parts, pumps, DI vessels etc would be positioned and protected within an insulated closed cabinet door to protect from damage, freezing temps etc.
Mine has this, baffled tank 650 LT all working parts enclosed within a thermal insulated cabinet door, "apart from the 9KW heater add on PF" the system is original, anchorage system could be improved, but apart from that all the WFP suppliers could learn a lot from the simple design of this baffled tank with insulated cabinet.
When temps drop below freezing, hose reels and poles go inside the garage, nothing within my van mount system has ever froze since 2006. And looks so tidy, black tank with all working parts within the cabinet. Flow controllers on the side of the tank and nothing to get knocked or damaged.
-
Just looking as dont fancy traveling to far. All I want is a caged 500 litre delivery system
-
Just looking as dont fancy traveling to far. All I want is a caged 500 litre delivery system
Then I'd say by far your cheapest option would be to source the raw components and either DIY or find a local mech engineer to fit your van.
-
If you go DIY give Hurn Plastics a ring, they built me a 1000lts baffled tank for £400 to make spec... Steve Stringer
349, Aviation Park West, Bournemouth Airport, BH23 6NW 01202 578813 07711 361642 steve-stringer@btconnect.com
-
Just looking as dont fancy traveling to far. All I want is a caged 500 litre delivery system
Then I'd say by far your cheapest option would be to source the raw components and either DIY or find a local mech engineer to fit your van.
its not as easy as you would first think to have a frame made up (it has to fit the tank), painted, fitted wired and working, I have designed a few trust me they are not that easy. the metal costs way more than you may think, as does the time involved.
-
A local garage fits their systems full cage over tank etc.not sure if fitted system is crash tested though.
-
had local welder to make my cage and fit, then electrics fitted by motor electrician,(cage and fitting £200,electrics £50,£250 all together)
-
get any decent garage to bolt the frame through the floor with pressure plates or and stick the rest on your self save yourself a fourtune