Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: concept on February 05, 2013, 10:51:42 am

Title: P5 error message?
Post by: concept on February 05, 2013, 10:51:42 am
Got a P5 error message on streamline controller, any ideas?

Cheers
Title: Re: P5 error message?
Post by: colin purewater on February 05, 2013, 11:01:20 am
Is it not ps? As in pressure switch
Title: Re: P5 error message?
Post by: concept on February 05, 2013, 11:06:19 am
Replacement needed or anything can be done to fix?
Title: Re: P5 error message?
Post by: Mike #1 on February 05, 2013, 02:01:09 pm
Controller should be fine happened to me the other week ,

Basically pressure has built up to the max and causes pump to cut out either hose was nipped or you have or had air in your system .

I had drawn air into pump and hose when tank was low and had been driving around happened once and has been fine ever since . Mike
Title: Re: P5 error message?
Post by: Ian Sheppard on February 05, 2013, 02:07:45 pm
Got a P5 error message on streamline controller, any ideas?

Cheers

This link may help
http://www.springltd.co/node/48

The controller displays PS - Pressure switch. The controller is advising that the pump pressure switch has activated. Normally due to high pressure build up in the system or in some cases it may be a loose connector between the pump and controller.
Title: Re: P5 error message?
Post by: concept on February 05, 2013, 05:17:04 pm
Thanks all for the replies, cleared itself after a bit of playing about...operator cant say what specifically sorted it, but its sorted.

Cheers!
Title: Re: P5 error message?
Post by: Ian Sheppard on February 06, 2013, 11:03:44 am
Good to hear that has helped. Most often the explanation is a straight forward one. Did the resource on the web site help? I am aiming at having a range of FAQ so anything that is not there let me know.
Title: Re: P5 error message?
Post by: concept on February 06, 2013, 02:31:08 pm
It certainly would've helped!

He got it sorted before I could look.