Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: easy clean on February 04, 2013, 07:35:07 pm
-
As title says, just trying to get an idea of what systems people use and what results they get.
Whether they pump it (at what pressure if so) or tap pressure, Tds in, Tds out (before resin).
And also feel free to post any pics of your set up.
Thanks
-
Streamline 300gpd pumped which makes it 110 psi, tap pressure is nothing
Tds in 380ish
Tds out 7 before resin.
But going to upgrade to a 4040 as soon as ive finished putting it together, as i need more water quicker
-
(http://www.cleanitup.co.uk/smf/1360007236_002.jpg)
This is my van mount system bought from the cleaning warehouse (wolves)
Tap tds 250 i plug a hose in the van port turn on tap and hey presto 3 hours later full tank with tds 0000 ;)
-
SB cleaning- how big is the tank and do you have good tap pressure? Have you ever took a reading before the resin?
-
Luke- that's what I had from Ro man, bought a 4021 cos wanted more water, plumbed it all in and not getting much more and much much higher Tds, do your homework or it may be a costly mistake!!!
-
SB cleaning- how big is the tank and do you have good tap pressure? Have you ever took a reading before the resin?
It's a 350 tank mate.....reading before resin is around 0010 my pressure is 60 psi (ish)
-
That's a lot better than I've been getting. @50 psi (tap) getting 48 lph at 32 Tds. 300 in
-
That's a lot better than I've been getting. @50 psi (tap) getting 48 lph at 32 Tds. 300 in
My resin lasts for ages too :P