Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: phillipscleaning on January 25, 2013, 10:50:42 am
-
Who run's two hose reels off one pump ? Do you still get a good flow rate and could this also be done on a water heater
-
I use 2 reels 1 pump through a heater and it works perfectly. Regarding the flow, if you currently work without a pump controller, then you will have reduced flow, but if you use a flow controller and it's not on full speed then you will be ok as you can just increase the flow to compensate for running 2 reels.
-
What ^ he said.
-
What ^ he said.
ditto
-
Yep
-
defo, works beautifully, what i do is have both hoses cut down to 50 meters and use a sureflow 100psi pump, this has an excellent flowrate, the 60psi not so much
-
This old chestnut again
-
This old chestnut again
If you don't ask you won't find out, is this not a forum for advise then ? or just a place for witty comment's ;D
-
Yes works no problem for last 5 years for me...on same pump :o
-
Just put a new set up together, 650 ltr tank, 2 outfeeds, two pumps two controllers, cam run controllers at 4 with good flow to both poles, cant see one pumo coping with high commercial jobs on two poles. But i may be wrong, cost me extra £140 for separate systems so not that much extra.
-
Yes, it works fine.
Dave