Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Sammy46 on January 20, 2013, 06:06:39 pm

Title: What wires do I cut/join to bypass flow controller on WCW backpac
Post by: Sammy46 on January 20, 2013, 06:06:39 pm

Hi Guys.
I have a WCW backpack (blue one). My flow controller isnt working properly so I would like to just bypass it completely so that it is either on or off only.
Im not sure what wires to cut or join to bypass it.

any info is greatly appreciated.

thanks

Title: Re: What wires do I cut/join to bypass flow controller on WCW backpac
Post by: Llaaww on January 20, 2013, 06:15:20 pm

https://www.youtube.com/watch?v=xdlfSTVRW_8

this may help

Title: Re: What wires do I cut/join to bypass flow controller on WCW backpac
Post by: combat1 on January 20, 2013, 06:31:20 pm

 :)

Title: Re: What wires do I cut/join to bypass flow controller on WCW backpac
Post by: richard jagger on January 20, 2013, 07:12:01 pm

Let me help you Mate. Open up your backpack and remove the wires you can leave the controller is to block the space the connect the battery black direct to the pump black wire on the pump.Then connect the red wire to the switch to the red on the pump. If you have brown wires they are the same as the red and blue wires are the same as black wires,Good luck ;D ;D

Title: Re: What wires do I cut/join to bypass flow controller on WCW backpac
Post by: andyM on January 20, 2013, 07:15:33 pm

Quote from: LLAAWW on January 20, 2013, 06:15:20 pm

https://www.youtube.com/watch?v=xdlfSTVRW_8

this may help

 ;D ;D ;D