Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Deangsi on January 19, 2013, 07:16:01 pm

Title: boiler 2man setup?
Post by: Deangsi on January 19, 2013, 07:16:01 pm

Hi guys how do you run your 2 man setups of one boiler? I have two pumps two controlers etc im looking at buying one of those l series boilers with the metal face and digital display on ebay

Title: Re: boiler 2man setup?
Post by: Lee GLS on January 19, 2013, 07:34:58 pm

1 pump 1 controller 2 reels. We had 2 pumps and 2 controllers and was worried about going to 1 controller and pump, but it works perfectly, really there is no need for 2. But having 2, but running 1 gives you a spare if the other breaks down.

Title: Re: boiler 2man setup?
Post by: Deangsi on January 19, 2013, 07:44:39 pm

Do the hoses have to be the same length bore etc pole hose mine all vary. Or can you have a tap on the one to give the other more flow

Title: Re: boiler 2man setup?
Post by: Lee GLS on January 19, 2013, 08:37:18 pm

im not sure to tell you the truth. we have 2 reels of 100m thermobore going to aqua dapters on the pole, i would imagine that have a smaller bore hose on one reel may cause different flow rates.

Title: Re: boiler 2man setup?
Post by: DaveG on January 19, 2013, 08:58:01 pm

I do exactly the same as Lee, although one reel has 8mm and the other 6mm, no problems at all.

Title: Re: boiler 2man setup?
Post by: Deangsi on January 19, 2013, 08:59:55 pm

Should be fine if one gets more than the other I will turn down tap on the one to allow more to the other