Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: David Kent @ KentKleen on January 17, 2013, 03:41:42 pm

Title: Hot Water System Hose?
Post by: David Kent @ KentKleen on January 17, 2013, 03:41:42 pm
I know you can buy thermobore etc etc does anyone use there standard type hose with a lpg gas water heater system? I am not wanting boiling water just warm. Many thanks
Title: Re: Hot Water System Hose?
Post by: Lee GLS on January 17, 2013, 03:48:12 pm
I started off with standard micro bore, but it really makes it swell, changed over to thermobore, no problems since.
Title: Re: Hot Water System Hose?
Post by: David Kent @ KentKleen on January 17, 2013, 03:54:41 pm
cheers Lee
Title: Re: Hot Water System Hose?
Post by: Gav Camm lammy 283 on January 17, 2013, 03:57:32 pm
Yes agreed only used heavy duty 6mm
Microbore it total bout an hour
More swells and distortions than a
Long balloon, had to bite the bullet
And order thermobore a nice Lil
Discount off Alex and some free advise
Oh and was only Luke warm too
Title: Re: Hot Water System Hose?
Post by: David Kent @ KentKleen on January 17, 2013, 03:59:04 pm
Cheers Gav
Title: Re: Hot Water System Hose?
Post by: dannymack on January 17, 2013, 04:33:04 pm
I use 6mm Thermobore that swells and stretches a little. I used 8mm before was ok had no probs with it. I find the water comes out slower with thermo and when you reel the hose in when its warm it gets squashed and makes water flow even slower !!!
Title: Re: Hot Water System Hose?
Post by: Scrimble on January 17, 2013, 05:06:48 pm
i use the standard yellow 8mm microbore hose and its fine,
Title: Re: Hot Water System Hose?
Post by: Cliff perkins on January 17, 2013, 07:14:58 pm
As above
Title: Re: Hot Water System Hose?
Post by: dazmond on January 17, 2013, 07:30:41 pm
i use thermobore with a cold system.excellent hose IMO.really tough and doesnt kink much. ;) ;D ;D

highly recommended


dazmond