Clean It Up
		UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: Steve Chapman on February 11, 2006, 09:58:05 am
		
			
			- 
				I've read alot about cfr tools, what are they and can they be used on any machine??? ???
			
 
			
			- 
				i take it that was a rubbish question then :'(
			
 
			
			- 
				
not a rubbish question at all
i dont personally have any cfr tools but itend to buy the hand tool 
once i upgrage the pump on my machine
as far as i know they can fit any machine and as far as iam awere
they need at least 200psi pump to work the way they should
 davy
			 
			
			- 
				I believe CFR handtools can work with 100 psi,  but higher  is better.
You can use them on any machine, but in addition to the handtool you need a conversion hose which comes with trigger assembly.  Works out about 400 ish for both. 
			 
			
			- 
				Register for www.truckmounters.co.uk and cleansmart are offering a free weeks trial of the cfr handtools 8)
			
 
			
			- 
				Now regestred with Truckmounters cheers Steve
James
			 
			
			- 
				Received cfr tool yesterday used on a suite excellent piece of kit.Well worth a try it ain't going to cost you anything if you don't like it.
Call Matt 0800 026 3373 
			 
			
			- 
				does anyone bother changing jets for different fabrics?
I lost my 5inch head and all the spare jets so only have the 'yellow' jet, not noticed a difference from when I used to change them.
Mike
			 
			
			- 
				Mike, My machine came with a brown and red jets,the latter being a courser spray which is the one i nearly always use,some times use the brown jet on weak or finer fabrics Never tried the yellow one :-\
regards
stu