Clean It Up
UK General Cleaning Forum => General Cleaning Forum => Topic started by: markphil58 on January 10, 2013, 04:14:29 pm
-
Happy New Year to all.
I am trying to find details and specification for a Falch T3H pressure washer. The machine currently is skid mounted and I want to convert it to a trailer mounted machine. I believe that the chassis for this machine is made by Al Ko in Germany but any part numbers or details to track the chassis numbers would be much appreciated. Thanks in anticipation.
-
If I remember correctly, Kevin Martin on here has a Falch machine. Youll find him and his details in the hard floor section. I dont think he slums it down here anymore ;D
-
If the machine is skid mounted then either just plonk it on a plant trailer or just make a spine trailer to take the skid. Alko make many OEM trailers for many applications like caravans etc
-
Happy New Year to all.
I am trying to find details and specification for a Falch T3H pressure washer. The machine currently is skid mounted and I want to convert it to a trailer mounted machine. I believe that the chassis for this machine is made by Al Ko in Germany but any part numbers or details to track the chassis numbers would be much appreciated. Thanks in anticipation.
Is it this one bought off ebay?
(http://i.ebayimg.com/t/Falch-Industrial-Jet-Washer-/00/s/MTIwMFgxNjAw/$(KGrHqN,!jcFC2trJkD7BQ0efuIknQ~~60_12.JPG)
-
I've got a Falch book here, here's the spec on the t3h.
(http://i46.tinypic.com/2l9chg.jpg)
-
Yes I thought about putting it onto a trailer and i have 2 trailers spare but Alko do a kit that will fit this machine and it is much neater to have the kit rather than a complete trailer. Also most trailers for this weight are twin axle and the one to fit the machine is single. It is 870kg and gross 1400kg. Thanks for your help and any further info re the part numbers from Alko would be much appreciated.
-
I looked seriously at these but the flow rate is just not there. It is ideal as a one operator machine but you can buy so much more for the same money!
Rob ;D
-
How much did thou give for it Mark? And what pump are you putting on it as we both know it needs one?
-
Yes I thought about putting it onto a trailer and i have 2 trailers spare but Alko do a kit that will fit this machine and it is much neater to have the kit rather than a complete trailer. Also most trailers for this weight are twin axle and the one to fit the machine is single. It is 870kg and gross 1400kg. Thanks for your help and any further info re the part numbers from Alko would be much appreciated.
Mark
The problem is the stupid sized tank they fit on the OEM one it's too small. Give Kurt Gerlach a call at Falch in Germany hespeaks perfect english and very helpful. You will need to register the serial number of the machine with them and they will then sell you parts direct
Kev Martin
Marblelife Ltd
Tiling Logistics
-
Thanks Kevin for your help and info. You are right about the tank. In order for it to look compact and smart they have ignored the small volume of the water tank. However, it is a brilliant bit of German engineering. Only the Germans would put a vice under the canopy in case you needed to work on it. I met the Export Manager Marcus Filch last week and he took the serial no. Thank again for the contact details, much appreciated.