Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: SimonBurton on January 08, 2013, 07:50:28 pm
-
Have a 300 gpd streamline system, producing about half a litre a min pump and 1.2 litre a min waste.
What's best move
Change flow restrictor from 1:3 to 1:5?
Add a 2nd membrane? And in series or parallel?
Something else.....
-
Not to sure if you could add another membrane, on the ro's that use the 100gpd ones you can only use 3 of them making it 300gpd.
What's wrong with it anyway?
-
Seems a bit thirsty on the waste water and slow. Probably ok once i get ibc tank running. thought as it is a single 300 new type membrane should be possible to double it to 600 and speed it up and reduce waste
-
Seems a bit thirsty on the waste water and slow. Probably ok once i get ibc tank running. thought as it is a single 300 new type membrane should be possible to double it to 600 and speed it up and reduce waste
No, 300 is 300.
I use a 200gpd and that produces nearly 950lts in 24 hours.
Every 1lt of pure it makes 2lts of waste in made.
Have you a pump on it?
-
Sorry Richard but you're wrong, it is a maximum of three membranes, they could be 100 or 150 or 300, as long as they are all the same and the restrictor is matched eg 3x150= 450= 450 restrictor.
-
Sorry Richard but you're wrong, it is a maximum of three membranes, they could be 100 or 150 or 300, as long as they are all the same and the restrictor is matched eg 3x150= 450= 450 restrictor.
Oh right, I did say I wasn't sure,
-
With pump on input after pre filters it is producing 30 litres an hour that's 720 a day, suppose that's ok, cost wise that's about 1.8 cu l a day which is about £8 on metre,
Was think inking adding another membrane would create less waste water, it currentlly has a reading of 14 out of membrane, 255 as water in and 362 for waste.
How's these figures?
Input pressure is crap here .. 2 bar...
-
With pump on input after pre filters it is producing 30 litres an hour that's 720 a day, suppose that's ok, cost wise that's about 1.8 cu l a day which is about £8 on metre,
Was think inking adding another membrane would create less waste water, it currentlly has a reading of 14 out of membrane, 255 as water in and 362 for waste.
How's these figures?
Input pressure is crap here .. 2 bar...
Urs should be making more than that a day, around 1363lts a day. mine is smaller than urs and making more water.
What price is ur water on a meter? Mines £1.25 per 1000lts
My water in is 450ppm and 12-14ppm before resin, not sure what waste is.
-
Running off garden hose, it's a single membrane system... Water including waste is about 4.34 per 1000 litres
-
Without the pump it produces 10 litres an hour! Something not right!
-
Seems strange then, I got garden hose to ahead, then it goes to a 5mm pipe into ro.
-
I had the same problem as you. I bought a booster pump from Freedom and also I fitted a tap on the waste to restrict waste output and water production improved. Tds 001. :-*
-
a tap to the waste, what does that do?