Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: hennessy window cl on December 26, 2012, 12:55:47 pm

Title: 20 minute timer
Post by: hennessy window cl on December 26, 2012, 12:55:47 pm

Hi folks , just wondering does the 20 minute cut out on the gas heaters mean from the moment you turn it on or the last time you turned off your waterflow,which. turns off the heater and it restarts again. Hope this post is clear. Liam.

Title: Re: 20 minute timer
Post by: Ste M on December 26, 2012, 01:08:02 pm

its from when you turn it on, i use triggers so even when i used to use my old L5 i never had this issue as the stop and start of using a trigger means you never go over the 20 minute time, now i have a fogwash though not using triggers is best as it helps me keep a good constant flow of hot water which maximises speed when cleaning conny roofs and facias and soffits

Title: Re: 20 minute timer
Post by: poleman on December 26, 2012, 02:11:02 pm

I looked into this and found it was going to be a right pain, so got this heater mate

http://www.cleanitup.co.uk/smf/index.php?topic=162971.0

Title: Re: 20 minute timer
Post by: R.C Property on December 26, 2012, 02:40:47 pm

I use a L5 heater and never have a problem with it, never cut outing my in over a month of using it.

The cut out timer is a very important bit of kit on it, it stops it overheating and possible fire.

Title: Re: 20 minute timer
Post by: keyser soze on December 26, 2012, 07:00:43 pm

never an issue with mine because i never have it on for that long...

Title: Re: 20 minute timer
Post by: SunShineCleaning on December 27, 2012, 04:49:21 pm

There is some way to adapt it but like others have said you turn it on and off frequently enough anyway.