Clean It Up
UK General Cleaning Forum => General Cleaning Forum => Topic started by: Blast Away on December 24, 2012, 02:50:29 pm
-
Anyone know the diameter and thickness sizes of the o rings for female QR couplings?
Need to get some ordered.
-
Bottom of the page, nitrile and viton or do you want the actual ring sizes
http://www.malcleanse.co.uk/quick-release-high-pressure-fittings-20mm-quick-release-fittings-c-3_139_166_170.html
That page Matt ::)
-
Bottom of what page?
Exchange engineering do them. have you got the qr with the triple o rings? I got some fro them and they seems better than standard.
-
http://simplybearings.co.uk/shop/Seals-O+Ring+Seals/c19_4501/index.html?gclid=CPrHtvjWs7QCFSHHtAodRE8AHQ
Done buy cheaper Chinesethe rubbers like plastic ...too hard.
-
I have always used the triple seal QR's but on heat the viton seals can fail prematurely so I use viton which last longer. I have changed to stainless which obviously dos'nt corrode which also gives the seals an easier life
-
I thought exchanges o rings were pricey but they are cheaper than malcleanse.
i boought 3 sets with a load of other stuff. Only used one set. im using the brass/stainless coating qr. bit of wd40 every now and them keeps them sweet.
-
To be honest I don't get through too many unless I run the hot box. It's way cheaper to get the sizes and buy a bag of them. I'll measure them after BAH HUMBUG
-
Ordered them now
Cross Section: 2.5mm
Inside Diameter: 20mm
Outside Diameter: 25mm