Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: STEVE-UK on December 23, 2012, 07:51:07 pm
-
moved to a new property and the pressure is low,its around 40 psi
what booster pumps are you guys with twin 4040 system using?
-
moved to a new property and the pressure is low,its around 40 psi
what booster pumps are you guys with twin 4040 system using?
This one works really well with commercial systems:
(http://www.ro-man.com/shop/image/cache/data/pump-200-228x228.jpg)
http://www.ro-man.com/shop/index.php?route=product/product&filter_name=pump&page=2&product_id=245
-
thats what i use altho i got mine from APS - but virtually same price
will run all day and all night if you need it to.
had mine over 3 years - only problem i had was normal hoselock hose will get sucked flat so on the intake side
use Nylon reinforced stuff
Darran
-
A tad too technical for me I’m afraid Steve, but I did just recently purchase, from RO man, their booster pump that they build up themselves and it has succeeded in cranking my water pressure up from 30 to 105 psi which has resulted in the supply waters tds reading, after the RO, being reduced from about 300 ppm down to just 1 ppm.
Oh look! There it is in the picture.
Nick
-
Clarke cbm240e
-
I have my RO at home so would you use its for just the RO or to boost the whole house ?
-
Just the RO
-
moved to a new property and the pressure is low,its around 40 psi
what booster pumps are you guys with twin 4040 system using?
This one works really well with commercial systems:
(http://www.ro-man.com/shop/image/cache/data/pump-200-228x228.jpg)
http://www.ro-man.com/shop/index.php?route=product/product&filter_name=pump&page=2&product_id=245
Same as mine, had it since 2007. Think RO Man said it was made in Italy?
-
thanks chaps...can you use standard hose and connectors if using one of these booster pumps?
-
moved to a new property and the pressure is low,its around 40 psi
what booster pumps are you guys with twin 4040 system using?
This one works really well with commercial systems:
(http://www.ro-man.com/shop/image/cache/data/pump-200-228x228.jpg)
http://www.ro-man.com/shop/index.php?route=product/product&filter_name=pump&page=2&product_id=245
Same as mine, had it since 2007. Think RO Man said it was made in Italy?
Any one run a merlin after this pump?
-
moved to a new property and the pressure is low,its around 40 psi
what booster pumps are you guys with twin 4040 system using?
This one works really well with commercial systems:
(http://www.ro-man.com/shop/image/cache/data/pump-200-228x228.jpg)
http://www.ro-man.com/shop/index.php?route=product/product&filter_name=pump&page=2&product_id=245
Same as mine, had it since 2007. Think RO Man said it was made in Italy?
Any one run a merlin after this pump?
yes :P
-
Whats the advantage of useing one ???
-
How will it help ???
-
4040 membranes work better at a higher pressure, their also increases water production
-
ditto for the Merlin it without a booster pump TDS after RO was 30 and produced 40 ltrs p/h with a pump TDS was 18 and production went upto 100 ltrs p/h
my 4040 system with pump produces 7 TDS and between 120 to 140 Ltrs p/h ( not timed it to extact l/ph )
Darran
-
Darran
do you have a single or twin 4040 system?
-
Single - PF system that came fitted with the van i brought
Darran