Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: ABLECLEAN on February 08, 2006, 07:49:46 pm

Title: Wand Clamps
Post by: ABLECLEAN on February 08, 2006, 07:49:46 pm

Hi all,

Just before crimbo I noticed cracks in the solution valve clamps on my wand so I ordered some from Woodbridge. Unfortunately, after a six week wait for the clamps to come from from the USA - yeah! you've guessed it - wrong ones >:( Woodbridge have identified the clamps as "King clamps" but cannot get any so I thought I would ask Y'all to see if you could come up with any suppliers.

Heeelp

Title: Re: Wand Clamps
Post by: craigp on February 08, 2006, 08:14:51 pm

may be you could try taking it in a welding work shop, surly they could repair or make you new clamps.

craig.

Title: Re: Wand Clamps
Post by: ABLECLEAN on February 09, 2006, 12:50:54 am

Yes Craig, I have a mate who welds aluminim and I asked him ages ago. but I was waiting for the new ones to arrive before I took the old ones off. There is no chance of having any made but I guess that welding is the only answer :(

Title: Re: Wand Clamps
Post by: colin thomas on February 09, 2006, 08:39:41 pm

not quite sure if this is what you are on about but my pressure hoses often leak and i take them to a pressure hose supplier to repair on the spot, look in yellow pages

Title: Re: Wand Clamps
Post by: colin thomas on February 09, 2006, 08:41:12 pm

oops! just read the post again and realise i am talking about something totally different, i'll get me coat :-X

Title: Re: Wand Clamps
Post by: Buster Ingram on February 09, 2006, 09:02:17 pm

If they are the Clamps I'm thinking of I have a couple of sets I don't use or should I say have never used you can have them  F.O.C call me to make sure they are the ones you want
07947 470307
Dave

Title: Re: Wand Clamps
Post by: ABLECLEAN on February 11, 2006, 12:03:33 pm

Thanks Dave, what a nice chap you are!! but I could'nt possibly take them for free (if they are the right ones). Iwill contact you and email you a picky of the clamps for your perusal.

Regards

EZ

Title: Re: Wand Clamps
Post by: Vernon Purcell on February 17, 2006, 05:53:25 am

Can you post a picture of the valve plate I have a hugh box of wand and hand tool hangers mayve I have one
Vernon