Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: redstarwindowcleaners on December 09, 2012, 07:28:49 pm
-
Have got a merlin thats been sitting around sinse last june
Never used one before
What do I need to get it running / costs
It worked well prior to being stored
All pipes etc are it tact
So I presume all I need is new filters
-
RO man
-
Ill take a look cheers
-
Gaps water are cheaper
-
Emailed him see what he comes back with
Cheers
-
Thanks tried gaps as well
See what they both come back with
-
Could I ask you what the waste ratio is on the Merlin? I used to use one but as my need to produce pure water increased I changed to a 4040. I am on a water meter and remember at the time finding the Merlin expensive to run
-
Although it was a great little starter system for me
-
Could I ask you what the waste ratio is on the Merlin? I used to use one but as my need to produce pure water increased I changed to a 4040. I am on a water meter and remember at the time finding the Merlin expensive to run
We were getting anything from 4:1 to 3:1 depending on pressure and temperature.
-
It takes 2 ro filters and a carbon filter. Both ro filters have to be changed at the same time and if you change them, you must change the carbon filter. In other words, all 3 have to be changed.
Cost is about the £150 mark and I've found the difference between different suppliers to be just a few pounds.
As for running costs and efficiency, I don't personally know as I don't pay for water, yet.
One thing with a merlin though is the higher the pressure, the better it works.
TDS output isn't wonderfull at about 15 - 21 with new filters. I changed mine about 2 months back and the output is now about 35 at approx 200 ltrs ave per day.
The main benifits of a merlin is gpd. I fill my van in a car park each night so for me, how quick it fills up the tank and barrels matters. 25ltrs with new filters and good pressure takes about 15 minutes.
If the speed at which you need to produce water doesn't matter, use a 4040 or something else. You'll save money on resin.
-
My Merlin comes out at 000 always. If the filter needs changed it simply slows down. My TDS is 50 to start with though.
GAPs water is the cheapest.
-
My Merlin comes out at 000 always. If the filter needs changed it simply slows down. My TDS is 50 to start with though.
GAPs water is the cheapest.
After the DI mine is 000 TDS. The TDS I wrote of above was before the DI.
I've found the opposite, the water production speeds up the older the filters get but the TDS goes up at the same time.
-
Emailed both the suppliers neither bothered to contact me
-
My Merlin comes out at 000 always. If the filter needs changed it simply slows down. My TDS is 50 to start with though.
GAPs water is the cheapest.
After the DI mine is 000 TDS. The TDS I wrote of above was before the DI.
I've found the opposite, the water production speeds up the older the filters get but the TDS goes up at the same time.
I get 000 after the RO, not DI.
-
Emailed both the suppliers neither bothered to contact me
Why would they? Their prices are on the website aren't they?
-
I was after some info as well as prices
Great customer service